The first Annual SYNCHRO-NET meeting

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

The SYNCHRO-NET project had its first annual project meeting in Barcelona in early June. I had a pleasure to take part in the three-day event and enjoy the welcoming atmosphere and sunny weather of the Catalonian capital.

For those who are not yet familiar with the project, SYNCHRO-NET is a three-and-half-year demonstration project on advanced logistics optimization. The project seeks to advance and promote new concepts of synchro-modality and slow steaming for more cost-efficient, less congested and greener intermodal supply chains. The project includes three demonstrations that test slow-steaming and synchro-modal solutions in real international logistics networks. The first demonstrator involves shipping of goods from the Far-East to the ports of Valencia, Algeciras and Barcelona, and subsequent movement by rail inland and final short truck movement. The second demonstrator focuses on regional logistics movements through the Port of Cork. The third demonstrator will address multimodal container movements in major European routes. The project is funded by the European Commission under the Horizon 2020 Programme.

During the two first days of the meeting, the Partner Forum discussed the SYNCHRO-NET work ahead: standardization, development of a tool for logistics optimization, real-world demonstrations, and exploitation and dissemination of the project’s results. The discussion produced some interesting findings and conclusions. The Partner Forum observed that, given the large number and variety of factors, the optimization of shipping and logistics in terms of cost (including CAPEX, crew cost, fuel), duration, environmental impact, reliability and various types of risks is nothing but an easy task. For example, weather, tide and state of the sea affect maritime logistics, its speed, reliability and cost-efficiency. There was also a great deal of discussion about the dimensions of risk in the meeting. The International Organization of Standardization (ISO) defines risk as the “effect of uncertainty on objectives.” In this light, the concept of risk in the SYNCHRO-NET context covers at least damage to cargo, lead time variability, variability of cost, and possibility of theft and piracy. The Forum concluded that cost-efficiency and quality of international logistics depend largely on real-time awareness and visibility over logistics operations: “the sooner you know, the lower the cost will be to solve the problem.”

The three days of SYNCHRO-NET meetings culminated in the International Logistics and Material Handling (SIL) conference, the primary annual industry fair and networking event for logistics professionals in Spain. In the conference, Mr. Santiago Blasco (DHL) introduced SYNCHRO-NET at the “Consumer & Goods” working session for a large audience. Later that day, a group of leading logistics experts from Spain and the rest of Europe debated on pressing topics at three SYNCHRO-NET roundtables. The roundtable sessions focused on the general theme “How to build win-win solutions synchro-modal logistics stakeholders.” Here are brief summaries of the roundtable sessions:

  • “Smart Steaming – how to build a win-win solution for all stakeholders.” The members of the roundtable raised concerns about organizational, technical and business challenges of future slow steaming. There are obvious draw-back in slow steaming such as longer lead times and lower capacity utilization. However, the panel concluded that smart rather than slow steaming is here to stay: “While maintaining high service level, we can make logistics more cost-efficient.”
  • ”Effective management of synchro-modal logistics.” The panelists of the second session argued that the concept of synchro-modality is not yet very established in the logistics sector. Even so, the panel agreed that synchro-modality builds on real-time optimization, risk analysis and advanced, ITC-enabled logistics planning. Synchro-modality requires visibility over the supply chain, so that logistics planers react to contingencies and can make effective decisions in real time. The panel concluded that collaboration across supply chain operators – especially among shippers, carriers, freight forwarders – is the key to synchronized international logistics.
  • “Synchro-modal IT tools: innovation and value added to the logistics industry.” The third panel focused on the rather technical topic of leveraging cloud-based IT architecture for advanced logistics planning. The panelists saw a great potential in modern ICT solutions to enable synchro-modality, smart steaming and other ways for optimizing international freight transport. There still remain challenges for bridging a broad array of different computer systems for higher degree of logistics interconnectedness and interoperability.

The SYNCHRO-NET project has had a strong start, and the project progresses on the right track and at the full speed after one year of work. There is still much hard work to do over the next six months, for CBRA and other partners. In autumn, CBRA researchers will be focusing on reviewing policies, legislations, and standards that have an effect on synchro-modality and slow steaming. The CBRA team will also continue promoting the SYNCHRO-NET project and its findings at various events and publications. Stay with SYNCHRO-NET and visit the project website www.synchro-net.org.

CBRA Blog by Dr. Toni Männistö

blogsynchronet

Figure 1 Santiago Bosco presenting SYNCHRO-NET at the the International Logistics and Material Handling (SIL) conference

Interview with Mr. Thorsten Neumann on TAPA EMEA

/0 Comments/in , , , , , , , , , , , , , , , , , , , , /by

21.6.2016: Today’s CBRA Interview is with Mr. Thorsten Neumann, from TAPA EMEA and Microsoft.

Hey Thorsten, can you first tell a bit about yourself and what you do?

Hey Juha, thanks for the opportunity to give an interview for the CBRA. First of all, my name is Thorsten Neumann, and I’m the chair of the Transport Assets Protection Association TAPA Europe, Middle East and Africa. I’m leading the board of directors in EMEA and I am the representative in the TAPA Worldwide Council. Furthermore, I’m the director for channel security management at Microsoft within the ANTIPIRACY services department, and I’m leading all our risk management-related Original Equipment Manufacturer (OEM) and Volume Licensing (VL) efforts inside our company. I’m in charge of business resilience, as well.

Can you tell more on TAPA EMEA: What are your main activities in the field of supply chain security?

Since TAPA was founded in 1997 in the US by four major global manufacturing companies, the organization has transformed into a completely new business model. And what we mainly do is, that we connect the dots within the end-to-end supply chain security world. In TAPA EMEA, we have people who are experts in various technologies, industries and countries. If you take a look what we’ve achieved in the last ten to twenty years, you can see that our security certification model has been very successful. It is today one of the most important pillars within the TAPA organization globally. The certification program covers mainly the Freight Security Requirements (FSR) and the Truck Security Requirements (TSR). We are now also working on new Parking Security Requirements (PSR). We also offer a lot of other services and systems, like the Incident Information Service (IIS) that provide tremendous benefits to our members. TAPA is involved in regulatory affairs, as well: we are interacting with the European Commission, the United Nations, the World Customs Organization and other great institutions – they all see us as the leading industry association fighting cargo theft in the global supply chain.

How would you describe both the benefits and challenges of conducting industry-academia research in the field of supply chain security?

Considering the ongoing TAPA-CBRA work, I think increased transparency and the opportunity to identify and fix the weakest security links in the supply chain are the main benefits. I do strongly believe in proactive partnerships with research experts who are capable of identifying and analysing return on investment linked to the great work we are doing as an association. I trust on CBRA’s professional skills and their outstanding network. I’m convinced that, with inputs from TAPA members, CBRA will build the most robust model possible for estimating the total cost of cargo theft. From the study point of view, I’m looking forward to work with you guys.

Can you elaborate a bit on the “Total Cost of Cargo Theft” study background and the expected outcomes of it?

In the first kick-off phase, we try to estimate the total cost of cargo theft in all three TAPA regions – EMEA, Americas and APAC. This study gives us a unique, global overview on the total cost of cargo theft and estimates on various cost components that account for the total cost. I’m proud to work together with CBRA, the Borås University in Sweden and Texas A&M in the US. The plan is also to engage the Singapore Institute for Materials Management (SIMM) in the study.

The background and motive of this study is the following: we are operating in a very competitive business environment, and therefore security managers need to justify and explain budget that they spend on cargo security. With this study, we could underline how dramatic impact cargo theft has not only on company profits but also on the entire economy of a country. If you take a look on what is happening right now for example in Germany, Italy, Netherlands, France, but also in South Africa, Brazil, Malaysia and so forth, you realize the seriousness of modern cargo crime. The study would give us the analytical background and results we need to sell what we do also to the government, to our own companies, to the CEO, CFO, but also of course the WCO, as one of the driving factors of fight against criminals within the supply chain.

Thanks a lot for this interview, Thorsten! By the way, HEC University of Lausanne Executive MBA students learn every spring about the latest & greatest in supply chain security management, including from “TAPA activists” like our buddy Gilad…. Maybe next year you could also join as a guest lecturer at the UNIL eMBA class?

I would be really happy and proud to be a guest lecturer at your university. This fits quite nicely my current activities as I’m already running lectures at the University in Bremen. Count me in and see you in the class room next year. Thanks!

CASSANDRA compendium. Private sector perspectives on risk management (Ch. 5) and crime prevention and security management in supply chains (Ch. 6)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Summary: Chapters 5 & 6 of the CASSANDRA compendium provide a general overview on supply chain security risk management from the private sector perspective. Explaining the essentials of supply chain risk management, Chapter 5 introduces commonly used risk management models and tools (e.g., risk matrices and risk registers), discusses various classifications of supply chain risks, and elaborates current trends of risks and risk management in the supply chain context. Chapter 6 focuses on specific challenges of supply chain security risks – the risks that arise from intentional, man-made criminal activities such as terrorism, theft, trafficking, and sabotage. The chapter explains a few early classifications of supply chain security risks (e.g., motive-based typology and taxonomies based on private sector perspectives). Following the classifications of security risks, the chapter puts forth a few models for managing security risks in the supply chain context (e.g., the 8-layer model for supply chain security management). The chapter concludes with a detailed case study on security management of an international security company and a comparison of supply chain security management and the total quality management (TQM) management philosophy. The CASSANDRA compendium is available for download: www.cassandra-project.eu. Review by Toni Männistö (CBRA)

[s2If is_user_logged_in()]

Full review: Previous observatory entries have already shown the relevance of the CASSANDRA compendium to the community of supply chain management professionals. The compendium’s chapters 5 & 6 give a brief summary of risk management and security risk management in the context of international supply chains. The contents of the chapters are relevant and useful for people involved in FP7 CORE project, especially for those involved in work packages 3 (Multi-method Threat and Vulnerability Analysis Suite) and 4 (SC Situational Awareness Tools & Maps).

Chapter 5 elaborates a set of common supply chain risk management tools. The model of Waters (2007) summarises rather obvious three steps of the risk management process: identifying risks, analysing risks and responding to risks. The model proposes, for example, that managers can identify supply chain risks through analysis of past events, collection of opinions, and through operational analysis. The model also calls for managerial attention to prerequisites of successful risk management – mutual trust, cooperation and information exchange among relevant stakeholders involved in supply chain management – and highlights importance of continuous monitoring and controlling the risk management process. The chapter concludes with the four classic approaches to risk management: risk avoidance, risk reduction, risk transfer (e.g., insurance and contractual agreements), and acceptance. The classifications of supply chain risks include typologies focusing on risk sources (natural hazards operational failure and terrorism), risk consequences (e.g., risk to operations, risk to reputation and risk to profits), and objects of vulnerability (e.g., information, materials, personnel and financial flows).

The chapter on crime prevention and security management (Ch. 6) in supply chains provides a concise summary on supply chain security management from the private sector perspective. The chapter starts by describing some early classifications of supply chain security risks. A motive-based taxonomy classifies such risks into the three categories: economic crime (profit as motive), other crime types (ideological, emotional and other reasons as motive) and facilitating crime that covers activities that do not bring direct crime benefits but help committing other rewarding crime crimes later on. (e.g., document fraud, bribery and use of intimidation). The chapter’s next section elaborates ways to mitigate security risks in the global supply chains, highlighting the key ideas of the so-called 8-layer model for supply chain security management (the model incorporates multiple aspects of risk assessment, hands-on design and planning, implementation of a variety of technologies, procedures, and incentives as well as preparation for dealing with the consequences of supply chain crime). The chapter provides also a case study with an international tobacco company that runs high security risk supply chain operations. The section also contrasts, rather interestingly, principles of security management against the fundaments of the total quality management (TQM) management philosophy. The chapter continues with a brief review of regulations (e.g., EU customs security and aviation security regulations) and standards on supply chain security management (World Customs Organization’s SAFE framework of standards, and industry standards of the Transported Asset Protection Association).

Reference

Hintsa, J. and Uronen, K. (Eds.) (2012), “Common assessment and analysis of risk in global supply chains “, Compendium of FP7-project CASSANDRA, Chapters 5 & 6

CORE2007

[/s2If]

SUPPLY CHAIN SECURITY – CBP Needs to Enhance Its Guidance and Oversight of High-Risk Maritime Cargo Shipments, GAO, January 2015 (CORE1059)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Summary: The report reviews the US Customs and Border Protection’s (CPB) approach to risk assessment and targeting of maritime shipping containers. The report’s highlights that CPB does not have clear decision rules and reporting procedures to monitor percentage of containers that the risk assessment system flags high-risk and that get eventually examined. The source of this problem is that the CPB’s officials (targeters) may waive examination of the high-risk containers if the container (i) falls within a predetermined category (standard exception), or (ii) the targeters can articulate why the shipment should not be considered high risk. The targeting units have currently differing definitions of “standard exceptions” and differing views on what constitutes the “articulate reasons.” The GAO report recommends the CPB to clarify, harmonize and enforce the rules and the procedures for waiving the high-risk containers from examination. As for CORE, this report provides a detailed and recent outlook on the US maritime risk assessment and targeting scheme, and this information is going to support work of the CORE’s risk cluster and the demonstrations that involve shipping of sea containers into the US. The report is available for download at: www.gao.gov/assets/670/668098.pdf.

[s2If is_user_logged_in()]

Full review: This GAO reports contains crucial information about the US risk assessment and container targeting systems that benefit the CORE’s risk cluster. The report outlines principles, procedures, datasets and scanning methods that constitute the world’s most advanced risk assessment system for maritime shipping containers. The CORE’s IT cluster might also benefit from the report’s description of the CPB’s Automated Targeting System (ATS) that is used to compute risk scores for shipping containers and flag the ones with the highest score as high-risk. Regarding the CORE demonstrations, the GM demon (WP19) must comply with data requirements (24-hour rule and the “10+2” rule) that enable the US risk assessment and targeting system. Also the demos involving customs controls, especially WP11.2 and WP10.1, may learn something from the ways how the US border control authorities are assessing risk levels of incoming containers.

Cross-references:

  • Supply Chain Security: CBP Needs to Conduct Regular Assessments of Its Cargo Targeting System. GAO-13-9. Washington, D.C.: October 25, 2012.
  • Maritime Security: Progress and Challenges in Key DHS Programs to Secure the Maritime Borders. GAO-14-196T. Washington, D.C.: November 19, 2013.
  • Supply Chain Security: Feasibility and Cost-Benefit Analysis Would Assist DHS and Congress in Assessing and Implementing the Requirement to Scan 100 Percent of U.S.-Bound Containers. GAO-10-12. Washington, D.C.: October 30, 2009.

Additional keywords: Security Filing and Additional Carrier Requirements (known as the 10+2 rule), 24-hour rule, risk assessment

 

CORE1059

[/s2If]

MARITIME SECURITY – Progress and Challenges in Key DHS Programs to Secure the Maritime Borders, GAO, November 2013 (CORE1018)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Summary: This report is a summary of previous GAO reports on US maritime supply chain security and border controls. The report focuses on progress and challenges in four main areas of the Department of Homeland Security’s (DHS) activity on the maritime security. The report highlights that DHS and its component Coast Guard agency could improve its maritime domain awareness through increased information sharing and more advanced vessel-tracking systems. The Customs and Border Protection (CBP) in turn could step up its role in securing US-bound container traffic by conducting more frequent risk assessment audits in key foreign ports that ship cargo into the US and by fostering more close relationship with foreign authorities. The GAO report also recommends the Coast Guard to rethink its maritime surveillance, interdiction and security operations because current protection and support is not adequate in high priority locations. The report also calls for more collaboration and coordination among maritime authorities, port operators and ocean carriers. Finally, the report encourages the DHS to develop performance metrics and data collection procedures the agency uses to assess and monitor its maritime security programs and activities. This report gives a recent update on the US maritime security activities that might be helpful for CORE demonstrations and clusters. The report is available for download at: www.gao.gov/assets/660/659087.pdf.

[s2If is_user_logged_in()]

Full review: This summary GAO documents provides detailed background material about the US maritime security programs. This information is very relevant for the CORE demonstrations WP9 and WP14 that involve shipping cargo from and into the US. The information this document offers also help the CORE’s risk and IT clusters to learn lessons from the US approach to risk-based maritime security and security-related IT integration.

Cross-references:

  • Maritime Security: Ferry Security Measures Have Been Implemented, but Evaluating Existing Studies Could Further Enhance Security. GAO-11-207. Washington, D.C.: December 3, 2010.
  • Supply Chain Security: DHS Could Improve Cargo Security by Periodically Assessing Risks from Foreign Ports. GAO-13-764. Washington, D.C.: September 16, 2013.

Additional keywords: Maritime security, maritime surveillance, risk-based controls, targeting, container scanning

 

CORE1018

[/s2If]

 

MARITIME SECURITY – Ongoing U.S. Counterpiracy Efforts Would Benefit From Agency Assessments, GAO, June 2014 (CORE1017)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , /by

Summary: This GAO report explains how the US government agencies have fought sea piracy around the Horn of Africa and at the Gulf of Guinea since 2010. The report also describes the current state of sea piracy threats in these two areas, and it urges US government agencies to reconsider their resource allocations, strategies and tactics related to the counterpiracy efforts. The report points out that the number of annual piracy incidents at the Gulf of Guinea has surpassed the yearly incidents off the Horn of Africa. This shift in pirate attacks prompt changes in the US counterpiracy operations. However, as the report points out, the US government agencies responsible for the counterpiracy activities have not recently conducted reassessments of their actions, despite the changing conditions. The report therefore recommends the US government agencies to re-evaluate the counterpiracy efforts, especially at the Gulf of Guinea that is becoming the most important hotspot of the international sea piracy. This GAO report provides information about modern sea piracy from which CORE’s maritime demonstrations might benefit. The report is available for download at: www.gao.gov/assets/670/664268.pdf.

[s2If is_user_logged_in()]

Full review: This GAO report delivers a comprehensive analysis of the current state of sea piracy at the two African hotspots and the US government’s counterpiracy efforts. This information benefits those CORE demonstrations that involve maritime shipping. The detailed description of the US counterpiracy efforts might also inspire the risk cluster to find effective and efficient risk-based solutions to protect maritime logistics and transport from sea piracy.

Cross-references:

  • Maritime Security: Federal Efforts Needed to Address Challenges in Preventing and Responding to Terrorist Attacks on Energy Commodity Tankers. GAO-08-141. Washington, D.C.: December 10, 2007.
  • Maritime Security: Actions Needed to Assess and Update Plan and Enhance Collaboration among Partners Involved in Countering Piracy off the Horn of Africa. GAO-10-856. Washington, D.C.: September 24, 2010.

Additional keywords: Maritime security, sea piracy

 

CORE1017 

[/s2If]

 

Review of TAPA TACSS – Air Cargo Security Standards, 2012 (CORE1045)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , /by

Summary: TAPA TACSS – Air Cargo Security Standards (TACSS) is a certifiable security program for the air cargo industry to close down, as much as possible, all risks for high value freight whilst being handled and transported on the ground. Available to General Public at the TAPA Website, this standard is hyperlinked here: https://www.tapaemea.com

[s2If is_user_logged_in()]

Full review: The Transported Asset Protection Association (TAPA) is a self-funded industry group comprising of manufacturers, shippers, logistics providers and law enforcement agencies that share the objective to eliminate loss of product by criminal act. The theft of high value, high risk products moving in supply chains in Europe costs businesses in excess of € 8.2 billion a year.

Although the focus of TAPA is to stop the unauthorized removal of items from the logistics chain, many of the methods used by criminals to achieve this are entirely relevant to the other security threats seen within the industry. E.g. unauthorized entry, deception techniques, tampering of shipments etc.  TAPA has created a number of certifiable security standards:

  • FSR (Freight Security Requirements)
  • TSR (Trucking Security Requirements)
  • PSR (Parking Security Requirements)
  • TACSS (TAPA Air Cargo Security Standards)

The latter one, TACSS is a set of security standards designed specifically for Air Cargo Handling Facilities. It takes into account the mode of operation of such terminals often having open doors, and yet often operating inside a secure area within an airport, behind a fence. By providing comprehensive requirements and a certification scheme for the protection of air cargo whilst being transported on the ground, TAPA hopes to provide its own members and industry partners with viable options for improving and/or maintaining an effective air cargo security program.

There are two levels to the Standard. Level 1 & Level 2, with 1 being the higher level of security, and the decision of which Level to certify against is decided by risk assessment which takes into account the geographical location of the facility and crime levels in the area. Certification is by Independent Validator against a checklist and valid for 2 years.

Detailed analysis of relevance for CORE: The CORE implementation objectives, which specify what will be done and how to reach the vision, are all subject to the Policies, Regulations, and Standards that exist within the Security Domain of the Global Supply Chain. Among all Work Packages of the project, some are directly impacted by the project, while others are solely primarily or secondarily contributed. Among these Work Packages, the CORE demonstrators will validate the applicability and benefits of the CORE approach in representative operating scenarios characteristic of the global supply chain. They will specifically show the way towards a Global Secure Supply Chain. The overriding goal is to demonstrate substantial gains in security and facilitation covering every major facet of the supply chain security sector.

The following Work Packages are directly impacted by the TACSS initiative:

  • WP7: CORE Connectivity Infrastructure and Solutions Development Environment – provide an integrated set of tools for developing solutions for the Demonstrators in line with SCSRF utilizing results from reference projects particularly e-Freight and ICargo.
  • WP12: Demonstrator Schiphol – apply global data pipeline concept to air cargo supply chains, managing air freight specific trade compliance requirements, and offering supply chain visibility in dashboards. Trade lanes with e.g. Africa, involving multiple inspection authorities.
  • WP17: DHL Demonstrator – managing airfreight trade compliance requirements EU-US in the context of fast supplying of parts. In this demonstrator, TAPA TACSS and mutual recognition with the US will become evident.

The following Work Packages are primarily affected by TAPA TACSS, as airfreight is part of global supply chain:

  • WP14: Demonstrator FALACUS – FastLAne through CUStoms – implement an extensive supply chain of ceramics products along international corridors between Italy and USA.
  • WP15: Decathlon Demonstrator – operational and security related Key Performance Indicators (KPIs) within the CORE framework will be applied to monitor the overall level of security within the supply chain for different supply chain actors Taiwan to retail shop destinations across Europe implementation of this new transit modality and the impact it would have on the overall performance of the supply chain.
  • WP19: Stakeholder Engagement – Knowledge Diffusion and Sustainable Development – Specify and apply an inclusive Stakeholder Engagement Strategy emphasizing international co-operation to promote harmonization of regulations, and to support further development and implementation of international standards.

The TACSS Initiative could also help with the following Work Packages, with the following secondary effects:

  • WP3: Multi-method Threat and Vulnerability Analysis (MTVA) Suite
  • WP4: SC Situational Awareness Tools & Maps
  • WP5: Real-time Lean Agile Resilient Green Optimized (LARG+O) SC
  • WP16: ENI Demonstrator
  • WP22: Analysis and Testing of a Secure Hybrid Composite Container

CORE Impact anticipation: CORE seeks to give consolidated solutions and develop the resilience, optimization and interoperability of the global supply chain, including Port, Container, Post, Truck, Rail, Maritime and Air. Air freight is thence a part of the global vision of CORE. TAPA TACCS contributes thence directly to CORE vision. Impact?

Cross-references: Air Cargo World on TAPA TACSS and air cargo crimes: www.aircargoworld.com

Full citation: TAPA EMEA Website, TACSS Page, accessed 23 September 2014: https://www.tapaemea.com

 

CORE1045

[/s2If]

Review of IATA E-Freight – an air cargo industry initiative facilitated by IATA, to remove paper from the supply chain, 2014 (CORE1044)

/0 Comments/in , , , , , , , , , , , , , , , /by

Summary: Launched by IATA in 2006 as part of the StB program, E-Freight became an industry-wide initiative involving carriers, freight forwarders, ground handlers, shippers and customs authorities. The roadmap to 100% E-Freight outlines a shared end-to-end industry approach with clear leadership roles, around three core components, or “pillars”:

  • Pillar I: Engaging regulators and governments worldwide to create an ‘e-freight route network’ with fully electronic customs procedures and where regulations support paperless shipments.
  • Pillar II: Working collaboratively within the cargo supply chain to digitize the core industry transport documents, starting with the air waybill.
  • Pillar III: Developing a plan to digitize the commercial and special cargo documents typically accompanying airfreight today, in or outside of the ‘Cargo pouch’ 2014 targets.

Year 2014 target was to grow global e-AWB penetration to 22%. Available to General Pubic at the IATA Website, this standard is hyperlinked here: http://www.iata.org

[s2If is_user_logged_in()]

Full review: Benefits: E-freight will bring following benefits to the air cargo industry:

  • Operational – shorter transit times, less paperwork (no copying/ printing/data-capturing)
  • Quality – improved transparency, reduced chance of data errors, no missing documents
  • Security – improved control of distribution of shipment details
  • Environmental – reduced paper consumption

Two key challenges of implementation: The first is that the ‘Contract of Carriage’ is printed on the reverse side of the paper Air Waybill. Without this, it is imperative that this ‘Contract’ is secured by other means. With this in mind, IATA has created a standard multilateral agreement that can be signed by Carrier and Agent / Forwarder as appropriate. The multi-lateral agreement was released in 2013, and will improve the numbers of e-freight shipments considerably. The second challenge is relevant to CORE and that is the electronic shipment data. This exists in two forms: FHL at House Air waybill level, and FWB at Master Air waybill level. Here the challenge is to get ‘first time right’ data. Without the correct data, any congruence checks made with the physical shipment will not align, and the shipment cannot be shipped. It is almost like turning up at the airport as a passenger with your brother’s passport.

Detailed analysis of relevance for CORE: The CORE implementation objectives, which specify what will be done and how to reach the vision, are all subject to the Policies, Regulations, and Standards that exist within the Security Domain of the Global Supply Chain. Among all Work Packages of the project, some are directly impacted by the project, while others are solely primarily or secondarily contributed. Among these Work Packages, the CORE demonstrators will validate the applicability and benefits of the CORE approach in representative operating scenarios characteristic of the global supply chain. They will specifically show the way towards a Global Secure Supply Chain. The overriding goal is to demonstrate substantial gains in security and facilitation covering every major facet of the supply chain security sector.

Data is relevant in the CORE project as it could be an enabler of some data screening, either to assess for cargo deemed to be more of a risk (like the ACAS trial running in North America), or even to specifically identify and target a specific shipment.

The following CORE Work Packages are directly impacted by the E-Freight initiative:

  • WP7: CORE Connectivity Infrastructure and Solutions Development Environment – provide an integrated set of tools for developing solutions for the Demonstrators in line with SCSRF utilizing results from reference projects particularly e-Freight and iCargo.
  • WP12: Demonstrator Schiphol – apply global data pipeline concept to air cargo supply chains, managing air freight specific trade compliance requirements, and offering supply chain visibility in dashboards. Trade lanes with e.g. Africa, involving multiple inspection authorities.
  • WP17: DHL Demonstrator – managing airfreight trade compliance requirements EU-US in the context of fast supplying of parts. In this demonstrator, Cargo 2000 and mutual recognition with the US will become evident.

The following Work Packages are primarily contributed by E-Freight, as airfreight is part of global supply chain:

  • WP14: Demonstrator FALACUS – FastLAne through CUStoms – implement an extensive supply chain of ceramics products along international corridors between Italy and USA.
  • WP15: Decathlon Demonstrator – operational and security related Key Performance Indicators (KPIs) within the CORE framework will be applied to monitor the overall level of security within the supply chain for different supply chain actors Taiwan to retail shop destinations across Europe implementation of this new transit modality and the impact it would have on the overall performance of the supply chain.
  • WP19: Stakeholder Engagement – Knowledge Diffusion and Sustainable Development – Specify and apply an inclusive Stakeholder Engagement Strategy emphasizing international co-operation to promote harmonization of regulations, and to support further development and implementation of international standards.

The E-Freight Initiative could also help with the following Work Packages, which are secondarily affected:

  • WP3: Multi-method Threat and Vulnerability Analysis (MTVA) Suite
  • WP4: SC Situational Awareness Tools & Maps
  • WP5: Real-time Lean Agile Resilient Green Optimised (LARG+O) SC
  • WP16: ENI Demonstrator
  • WP22: Analysis and Testing of a Secure Hybrid Composite Container

CORE Impact anticipation: CORE seeks to give consolidated solutions and develop the resilience, optimization and interoperability of the global supply chain, including Port, Container, Post, Truck, Rail, Maritime and Air. E-Freight contributes thence directly to the CORE vision.

Cross-references: WCO News Magazine: http://www.wcoomd.org

Full citation: IATA Website, E-Freight Page, accessed 23 September 2014: http://www.iata.org

 

CORE1044

[/s2If]

Review of Cargo 2000, C2K – an IATA interest group with the mission of creating and implementing quality standards for the worldwide air cargo industry, 2015 (CORE1043)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Summary: Cargo 2000 is the quality standard for the tracking, measuring general air cargo shipments. It is a project commenced in 1997 and is supported by a self-funded group of the world’s leading Airlines, Forwarders, Ground Handling Agents and specialist IT providers. IATA then provides oversight, administration and facilitation on behalf of the Membership. Cargo 2000 (C2K) uses standard recognized IATA Cargo-IMP (Interline Message Procedures) already used within the air cargo industry to provide reference points for measurement. These are known as FSU (Freight Status Update) messages. The key metrics under C2K are NFD (Notified for Delivery), in which case the destination has received both the physical cargo shipment and the information (paper or electronic) is available for collection by the Agent of the Consignee, and FAP, Flown as planned. In this case, the service delivered matches that which was promised to the customer in terms of timings and flights. In order to simplify and standardize the various processes that support C2K, as it is used by multiple stakeholders in a live environment, the C2K Master Operating Plan (MOP) was completely revised in 2012. The result is a very visual process description that allows every stakeholder to clearly see the part they play in the overall end-to-end routing of the shipment. The visual nature of the schematics, also allows the assessment of any new legislation, processes or procedures to be predicted both up and down the chain. Available to General Pubic at the IATA Website, this standard is hyperlinked here: http://www.iata.org

[s2If is_user_logged_in()]

Full review: Relevance for CORE: The CORE implementation objectives, which specify what will be done and how to reach the vision, are all subject to the Policies, Regulations, and Standards that exist within the Security Domain of the Global Supply Chain. Among all Work Packages of the project, some are directly impacted by the project, while others are solely primarily or secondarily contributed. Among these Work Packages, the CORE demonstrators will validate the applicability and benefits of the CORE approach in representative operating scenarios characteristic of the global supply chain. They will specifically show the way towards a Global Secure Supply Chain. The overriding goal is to demonstrate substantial gains in security and facilitation covering every major facet of the supply chain security sector.

The following CORE Work Packages are directly impacted by the C2K Industry Standards:

  • WP7: CORE Connectivity Infrastructure and Solutions Development Environment – provide an integrated set of tools for developing solutions for the Demonstrators in line with SCSRF utilising results from reference projects particularly e-Freight and iCargo.
  • WP12: Demonstrator Schiphol – apply global data pipeline concept to air cargo supply chains, managing air freight specific trade compliance requirements, and offering supply chain visibility in dashboards. Trade lanes with e.g. Africa, involving multiple inspection authorities.
  • WP17: DHL Demonstrator – managing airfreight trade compliance requirements EU-US in the context of fast supplying of parts. In this demonstrator, Cargo 2000 and mutual recognition with the US will become evident.

The following CORE Work Packages are primarily contributed by C2K:

  • WP14: Demonstrator FALACUS – FastLAne through CUStoms – implement an extensive supply chain of ceramics products along international corridors between Italy and USA.
  • WP15: Decathlon Demonstrator – operational and security related Key Performance Indicators (KPIs) within the CORE framework will be applied to monitor the overall level of security within the supply chain for different supply chain actors Taiwan to retail shop destinations across Europe implementation of this new transit modality and the impact it would have on the overall performance of the supply chain.
  • WP19: Stakeholder Engagement – Knowledge Diffusion and Sustainable Development Specify and apply an inclusive Stakeholder Engagement Strategy emphasising international co-operation to promote harmonisation of regulations, and to support further development and implementation of international standards.

The C2K Standard will have the secondary effects on the following Work Packages:

  • WP3: Multi-method Threat and Vulnerability Analysis (MTVA) Suite
  • WP4: SC Situational Awareness Tools & Maps
  • WP5: Real-time Lean Agile Resilient Green Optimised (LARG+O) SC
  • WP16: ENI Demonstrator
  • WP22: Analysis and Testing of a Secure Hybrid Composite Container

CORE Impact Anticipation: CORE seeks to give consolidated solutions and develop the resilience, optimisation and interoperability of the global supply chain, including Port, Container, Post, Truck, Rail, Maritime and Air. Cargo 2000 contributes thence directly to CORE vision.

Cross References: Introduction to Cargo 2000 by IATA, http://www.iata.org/whatwedo/cargo/cargo2000/Documents/c2k-introduction.pdf

Full Citation: IATA Website, Cargo 2000 Page, accessed 22 September 2014: http://www.iata.org

 

CORE1043

[/s2If]

SIECA delegation visiting Europe in June 2015

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

I had a great pleasure to be the lead host for a 12 person SIECA delegation visit to Europe in June 2015. We spent two days in the Netherlands, one day in Belgium and two days in Switzerland in an action-packed tour, visiting several border areas, governmental offices and beyond.

The idea to organize a one-week customs and international trade visit tour to Europe first came when Mr. Roman Stoll from the Federal Customs Administration of Switzerland and I paid a four-day visit at the SIECA Secretariat in Guatemala City in March 2015. There we had several meetings and discussions on World Trade Organization´s Trade Facilitation Agreement, WTO TFA, implementation plans with the SIECA management – Ms. Carmen Gisela Vergara Mas and Mr. Javier Gutierrez; with Customs management and experts from all the six SIECA member countries; and with representatives of the Intra-American Development Bank. Some weeks after the Guatemala-visit, SIECA and IDB confirmed the willingness to come over to Europe, to learn about good practices in international trade, supply chain and border management in the Netherlands, Belgium and Switzerland. And after couple of hundreds of emails and phone calls – myself acting as the focal point in arranging the visit – we were ready to welcome the SIECA Delegation to Europe between Monday 1 June and Friday 5 June, 2015.

blog 22.03.20161Monday-Tuesday we had a full agenda in the Netherlands. Monday started by presentations on Dutch Customs in general, and Schiphol Customs in specific, focusing on risk management, coordinated border management, and the SmartGate solutions at the Schiphol Airport. This was followed by a roundtable discussion with representatives from the Dutch Ministries of Foreign Affairs and Economic Affairs, as well as with an expert from the air cargo industry. During Monday the SIECA delegation gained firsthand knowledge for example on One-Stop Shop (OSS) implementation steps in the Netherlands: Step 1. Information exchange; 2. Joint inspections; 3. Training specialists; 4. Joint risk analysis by both inspections and selection by Customs; and Step 5. One inspection inspects for the other. The program on Tuesday consisted of a tour in Port of Rotterdam, at the APM 2 Container terminal; as well as a visit to the Central command post of nuclear detection and an X-ray container scanner. In between we had a typical “Dutch sandwich” lunch, kindly offered by the hosts. The delegation enjoyed seeing the ultimate high level of automation at the new container terminal, as well as visiting a pragmatic “one stop inspection room”, where multiple border agencies work together inspecting containers flagged for manual inspections.

Wednesday was spent in Brussels, Belgium. In the morning, the trade representatives of the SIECA Delegation went to the European Commission, DG TRADE, for EU-SIECA related discussions. In the afternoon, most of the delegation visited the World Customs Organization, where the meeting started with discussions with the WCO Secretary General Dr. Kunio Mikuriya and the WCO Deputy Secretary General Mr. Sergio Mujica. This was followed by a presentation on WTO Trade Facilitation Agreement and the linked WCO Instruments, by Ms. Heike Barczyk, the Deputy Director of Compliance and Facilitation Directorate at the WCO. Lastly, we had a brief presentation and roundtable discussions on the European Flagship Supply Chain Security Research, Development and Demonstrations project called FP7-CORE. This discussion was joined by Mr. Nik Delmeire, the Secretary General of the European Shippers Council; Ms. Nicolette van der Jagt, the Secretary General of CLECAT, the European association for forwarding, transport, logistics and customs services; and myself, Dr. Juha Hintsa, Founder of the Cross-border Research Association. After the meeting at WCO, it was time to fly from Brussels to Basel, Switzerland.

blog 22.03.20162Thursday-Friday we had a packed program in Switzerland. Despite some “navigation challenges” with our three-car convoy, we arrived on time from Basel to Bern at the Directorate General of the Federal Customs Administration. We heard several interesting presentations focusing on performance mandate, tasks and strategy of Swiss Customs; on international affairs section and it’s relevant international cooperation program; on shifts from traditional revenue collection to environmental and incentive taxes; and on strategy and challenges regarding future customs clearance systems and platforms – all this by three top experts from Swiss Customs. I presented the outcomes of Swiss Customs and Cross-border Research Association -visit to SIECA in March 2015, suggesting some specific areas and priorities for future co-operation activities. Next, the Delegation visited the Federal Department of Foreign Affairs, where the discussions focused on Swiss foreign policy in Central America and bilateral cooperation Switzerland – Central America; as well as on political and economic regional integration in Central America. After a quick photo session on the Bundeshaus terrace facing over River Aare, our journey continued towards the Swiss Customs facilities at the Zurich Airport. Again, there were some “logistics challenges” on the way to Zurich, when one of our three cars suddenly lost all engine coolant – fortunately a gas station was close by, and a road service company (car + mechanic) happened to be there. At the Zurich Airport, the SIECA Delegation learned a lot of details about Swiss Customs operations with air cargo and passenger flows. And as the last agenda item, we met a cute black Labrador retriever, who together with his trainer showed how effortlessly he finds illicit goods hidden in air cargo boxes and pallets…

On Friday morning – last day of the journey – we had again an early wake-up call at our hotel in Basel. We were warmly welcomed by Swiss Customs Officers at the Basel/Weil- Motorway border-crossing point – the highest volume customs clearance point in Switzerland. First the hosts explained about facts and figures on Basel/Weil, topped with interesting information on customs risk management processes and IT-systems. Now we all know that on average 3500 trucks cross the Basel/Weil border per day, and that around 600 million CHF is collected annually as indirect taxes at that border crossing point. After that we took a rooftop view over the border area premises, discussing further Import/Export/Transit -procedures, as well as visited the Swiss Transito-Cabins / Checkpoints. From the motorway we drove to the Swiss Customs House at the Basel Port, visiting the famous tri-border-point between Switzerland, Germany and France. There the Delegation learned about the barge traffic on River Rhine – the same river we saw three days earlier at Port of Rotterdam. From the Basel Port, we drove again to Bern, this time to visit the State Secretariat for Economic Affairs, SECO. Lively discussions took place on the SECO rooftop meeting room on topics including EFTA – Central American FTA, as well as Bilateral Economic Relations Switzerland – Central America. And after lunch kindly offered by SECO, we headed towards Geneva for the final meeting of the week: World Economic Forum, WEF, where we all arrived just in time to learn about the organization and the key activities of WEF, including: the work of the WEF in Latin America, with updates from the Latin American Summit; and, the work of the WEF on trade and investment policy and implementation, including Policy Directions, Enabling Trade Index, Enabling Trade implementations. The United Nations Economic Commission for Europe, UNECE, was kind enough to explain about latest developments and trends in single window projects and implementations. And lastly, I shared briefly select work on trade facilitation and supply chain security research and education materials by the Cross-border Research Association and HEC University of Lausanne.  I highlighted the important developments taking place within the FP7-CORE project – referring naturally to our meeting two days earlier at the World Customs Organization.

This concludes the brief summary of the SIECA week in Europe, and now I would like to thank all the SIECA Delegation members for coming over and spending the five days with us, here on the old continent:

  • Costa Rica: Mr. Jhon Fonseca, Vice Minister Foreign Trade; and Mr. Luis Fernando Vasquez Castillo, Costa Rica Customs.
  • El Salvador: Mrs. Luz Estrella Rodriguez, Vice Minister Foreign Trade
  • Guatemala: María Luisa Flores Villagran, Vice Minister Foreign Trade; and Mrs. Maria Elisa Chang, Guatemala Customs.
  • Honduras: Jeronima Urbina, Director of Economic Integration
  • Nicaragua: Eddy Aldolfo Artola Garciá, Director Risk Management of Nicaragua Customs.
  • Panama: Melitón Arrocha. Minister Foreign Trade; Mrs. Diana Salazar, Vice Minister Foreign Trade; and Mr. José Gómez Núnez DG of Panama Customs.
  • SIECA Secretariat: Carmen Gisela Vergara Mas, Secretary General
  • Intra-American Development Bank: Mr. Jaime Granados

And last but not least, warmest thanks to all the local hosts: Dutch Customs Administration; Dutch Ministry of Foreign Affairs; Dutch Ministry of Economic Affairs; European Commission DG TRADE; World Customs Organization; Federal Customs Administration of Switzerland; Federal Department of Foreign Affairs of Switzerland; State Secretariat for Economic Affairs of Switzerland; and World Economic Forum.

CBRA Blog by Juha Hintsa

blog 22.03.20163PS. If your country / region would be interested on a similar European field visit, please contact us – we could organize the practical details for the next delegation, possibly every 1-2 years (of course the actual hosts need to agree to the visit in the first place, that goes without saying…). And one final note: next time a bus and a professional driver need to be rented, please!