The first Annual SYNCHRO-NET meeting

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

The SYNCHRO-NET project had its first annual project meeting in Barcelona in early June. I had a pleasure to take part in the three-day event and enjoy the welcoming atmosphere and sunny weather of the Catalonian capital.

For those who are not yet familiar with the project, SYNCHRO-NET is a three-and-half-year demonstration project on advanced logistics optimization. The project seeks to advance and promote new concepts of synchro-modality and slow steaming for more cost-efficient, less congested and greener intermodal supply chains. The project includes three demonstrations that test slow-steaming and synchro-modal solutions in real international logistics networks. The first demonstrator involves shipping of goods from the Far-East to the ports of Valencia, Algeciras and Barcelona, and subsequent movement by rail inland and final short truck movement. The second demonstrator focuses on regional logistics movements through the Port of Cork. The third demonstrator will address multimodal container movements in major European routes. The project is funded by the European Commission under the Horizon 2020 Programme.

During the two first days of the meeting, the Partner Forum discussed the SYNCHRO-NET work ahead: standardization, development of a tool for logistics optimization, real-world demonstrations, and exploitation and dissemination of the project’s results. The discussion produced some interesting findings and conclusions. The Partner Forum observed that, given the large number and variety of factors, the optimization of shipping and logistics in terms of cost (including CAPEX, crew cost, fuel), duration, environmental impact, reliability and various types of risks is nothing but an easy task. For example, weather, tide and state of the sea affect maritime logistics, its speed, reliability and cost-efficiency. There was also a great deal of discussion about the dimensions of risk in the meeting. The International Organization of Standardization (ISO) defines risk as the “effect of uncertainty on objectives.” In this light, the concept of risk in the SYNCHRO-NET context covers at least damage to cargo, lead time variability, variability of cost, and possibility of theft and piracy. The Forum concluded that cost-efficiency and quality of international logistics depend largely on real-time awareness and visibility over logistics operations: “the sooner you know, the lower the cost will be to solve the problem.”

The three days of SYNCHRO-NET meetings culminated in the International Logistics and Material Handling (SIL) conference, the primary annual industry fair and networking event for logistics professionals in Spain. In the conference, Mr. Santiago Blasco (DHL) introduced SYNCHRO-NET at the “Consumer & Goods” working session for a large audience. Later that day, a group of leading logistics experts from Spain and the rest of Europe debated on pressing topics at three SYNCHRO-NET roundtables. The roundtable sessions focused on the general theme “How to build win-win solutions synchro-modal logistics stakeholders.” Here are brief summaries of the roundtable sessions:

  • “Smart Steaming – how to build a win-win solution for all stakeholders.” The members of the roundtable raised concerns about organizational, technical and business challenges of future slow steaming. There are obvious draw-back in slow steaming such as longer lead times and lower capacity utilization. However, the panel concluded that smart rather than slow steaming is here to stay: “While maintaining high service level, we can make logistics more cost-efficient.”
  • ”Effective management of synchro-modal logistics.” The panelists of the second session argued that the concept of synchro-modality is not yet very established in the logistics sector. Even so, the panel agreed that synchro-modality builds on real-time optimization, risk analysis and advanced, ITC-enabled logistics planning. Synchro-modality requires visibility over the supply chain, so that logistics planers react to contingencies and can make effective decisions in real time. The panel concluded that collaboration across supply chain operators – especially among shippers, carriers, freight forwarders – is the key to synchronized international logistics.
  • “Synchro-modal IT tools: innovation and value added to the logistics industry.” The third panel focused on the rather technical topic of leveraging cloud-based IT architecture for advanced logistics planning. The panelists saw a great potential in modern ICT solutions to enable synchro-modality, smart steaming and other ways for optimizing international freight transport. There still remain challenges for bridging a broad array of different computer systems for higher degree of logistics interconnectedness and interoperability.

The SYNCHRO-NET project has had a strong start, and the project progresses on the right track and at the full speed after one year of work. There is still much hard work to do over the next six months, for CBRA and other partners. In autumn, CBRA researchers will be focusing on reviewing policies, legislations, and standards that have an effect on synchro-modality and slow steaming. The CBRA team will also continue promoting the SYNCHRO-NET project and its findings at various events and publications. Stay with SYNCHRO-NET and visit the project website www.synchro-net.org.

CBRA Blog by Dr. Toni Männistö

blogsynchronet

Figure 1 Santiago Bosco presenting SYNCHRO-NET at the the International Logistics and Material Handling (SIL) conference

New survey on European postal security

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , /by

PostEurop and Cross-border Research Association have launched a new online survey on postal security management to promote further development and implementation of best security practices in the postal sector. The survey is part of the ongoing SAFEPOST project that the European Commission is co-funding under the Seventh Framework Programme (FP7). SAFEPOST project going to finish in the end of July after four years of work towards higher postal security in the European Union.

The survey studies the current state of postal security management among PostEurop members, 52 postal operators in 49 European countries. The goal is to collect responses mainly from security and safety managers of the PostEurop members, but also postal expert familiar with sorting and distribution processes are welcome to provide their inputs. The first part of the survey focuses on security implementation and security performance, and the second part studies postal managers’ expectations and concerns regarding the following six main SAFEPOST innovations:

Common Postal Security Space:

SAFEPOST has created an online platform for sharing security-related information between postal operators. This Common Postal Security Space provides a digital track record of security controls and related evidence (for example X-ray images) that a postal parcel has encountered over its journey, and facilitates an easy and controlled way to exchange information both with other operators as well as the authorities.

D-tube drug screening station:

SAFEPOST has demonstrated a new screening solution, D-tube, that can be fully integrated into the sorting process. The D-Tube’s prototype detects illegal substances, such as narcotics and explosives, at high accuracy.

Explosive detection system:

SAFEPOST has demonstrated a Raman spectroscopy screening device for detecting trace amounts of explosives and explosive precursors on the outside of postal items. The device is designed to be seamlessly integrated, at the same level as X-ray machines already used today, in the sorting process and detect the explosive threats at a high accuracy and at a low false alarm rate (≈ 1 %).

Image recognition system:

SAFEPOST has developed an Image Recognition solution that photographs five visible sides of a postal parcel at one or more locations in the postal network. The solution compares these images to detect signs of tampering or damage (≈ 92% detection rate). The current solution functions properly when the conveyor belt moves no faster than 0.5 m/s.

Radiological screening:

SAFEPOST has demonstrated detection of radiation in moving parcels, that can be fully integrated into the sorting process. The current version of the detector is able to detect any harmful level of radiation, and identify the radioactive isotope, and when possible to consider effects of possible attempts of hiding the radioactivity with lead or other shielding material by detecting neutron radiation.

Security standard and certificate:

SAFEPOST project is working towards a new European security standard for the postal operators that would give recommendations about use of security inspection technologies, exchange of security-related information, cyber security, and key security performance indicators. This standard would pave the road towards a voluntary security certification program that would help the postal operators to show their commitment to security.

This survey research is expected to produce interesting new insights about postal security activities and security performance among the PostEurop members. If the response rate is high, the survey findings will set a basis for pan-European benchmarking of security activities. The findings would also contribute to smart policy making, legislation, and standardisation in the field of postal security.

Finally, depending on the response rate, CBRA is going to publish an academic journal paper based on the results. Building on solid theory on supply chain security risk management, the journal paper would provide new empirical about how supply chain security implementation is associated operational and security performance. We expect that collaborative security measures improve both on-time delivery performance (a proxy for operational performance) and supply chain security performance simultaneously. Collaborative security measures include survey items such as “we coordinate security activities with our business customers” and “we exchange customs declaration information with customs authorities electronically [for example, ITMATT or CUSITM messages]”. Another hypothesis is that, on the one hand, non-collaborative security contributes to supply chain security performance but decrease on-time delivery performance on the other hand. Examples of such non-collaborative measures include “we use tamper-evident mail bags to transport high-value postal items” and “We perform security controls also on non-airmail items to detect explosives.” The figure below summarises the theory and hypotheses of the research paper.

blog1506161

Figure 1 Theoretical framework of the SAFEPOST survey paper

The survey findings will be presented in the final SAFEPOST meeting in Madrid 5-6 July 2016. After the meeting, we hope that we can expand the scope of the survey to cover the rest of the world, as well. The next step would be to contact representatives of the Universal Postal Union (UPU) and coordinate distribution of the survey into the organisations’ 192 member countries.

 

CASSANDRA compendium. Standards in supply chain management (Ch. 9)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , /by

Summary: Chapter 9 of the CASSANDRA compendium lists and discusses various standards that set the context for international supply chain management. The chapter focuses especially on management standards (e.g., ISO28000), technical standards (e.g., RFID, electronic seals and barcodes), standards for exchange of information among supply chain stakeholders (e.g., UN/EDIFACT and XML messaging), and customs security standards (especially the World Customs Organisations’ SAFE Framework of Standards). GS1 Global Visibility Framework and other industry standards are included in the discussion, as well. The chapter points out that because a large variety of standards are already available, the challenge is not a lack of standardisation but the lack of harmonisation between different standards. The section also concludes that even if the diversity of standards was harmonised, the next step would be to ensure that the standards would be consistently implemented in different contexts.

[s2If is_user_logged_in()]

Full review: The chapter focuses on listing different standards that affect the modern supply chain management. There not much details to be reported in this section. However, especially people working with CORE work package 6 “SCS Reference Framework and Standards” should read the brief listing and general discussion of standards and standardisation. Other chapters of the CASSANDRA compendium provide complementary information about standardisation in the field of supply chain management (e.g., Ch. 5 & 6).

Reference

Hintsa, J. and Uronen, K. (Eds.) (2012), “Common assessment and analysis of risk in global supply chains “, Compendium of FP7-project CASSANDRA, Chapter 9

CORE2007

[/s2If]

CASSANDRA compendium. Technologies for supply chain visibility and security (Ch. 8)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Summary: Chapter 8 of the CASSANDRA compendium reviews current and future technologies that help managers to improve visibility and security over global end-to-end supply chains. The supply chain visibility technologies, in essence, provide logistics managers with a variety of information – shipment data, performance metrics, inventory levels, production / delivery schedules and sales forecast, for example – in or close to real time. The chapter’s review on supply chain security technologies focus mainly on security sensors (e.g., motion detectors), container seals, biometric user authentication devices (e.g., fingerprints), and non-intrusive inspection equipment (e.g., X-ray screening stations). The section also elaborates modern ways for sharing information among stakeholders that are concerned about security of the supply chain. The CASSANDRA compendium is available for download: www.cassandra-project.eu. Review by Toni Männistö (CBRA)

[s2If is_user_logged_in()]

Full review: Chapter 8 includes some interesting details and insights about modern visibility and security technologies, many of which are relevant especially for CORE demonstrations but also for other work packages such as WP2 (SCS controls), WP7 (CORE Connectivity Infrastructure and Solutions Development Environment) and WP8 (CORE Ecosystem).

Many large logistics operators have developed own supply chain visibility systems to coordinate and organise logistics operations. A large logistics service provider, Kühne+Nagel uses its KN login visibility system that allows the company to optimise its complex global operations in terms of speed, time-certainty, security and cost-efficiency and many other relevant metrics. DHL, a German-based international express courier and logistics company, uses its LOGIS software for its operations. Previous EU projects have also developed visibility systems, for example Smart CM SICIS (Shared Intermodal Container Information System).

These visibility systems enable fast response to most operational contingencies that are about cause deviations from original plans. For instance, if a shipper got instant information about a stolen container, a new delivery could be quickly arranged and the consignee could be informed as soon as possible about the reshipment. Moreover, the visibility systems often interface ITC systems of other key stakeholders in the international supply chains. Customs, for example, receive advance cargo information (ACI) automatically from these systems.

The second part of the chapter 8 focuses exclusively on security technologies. The review starts with description of security sensors that are designed to detect tampering, unplanned detours, and other suspicious events in the supply chain. The modern sensor technologies sense at least changes in lighting, acceleration, location (geo-fencing functionality), motion and CO2 levels (used, e.g., to detect stowaways inside shipping containers). The chapter introduces modern user authentication technologies (e.g., fingerprints, face, retina, hand geometry and other unique biometric characteristics). Some information is provided regarding non-intrusive screening solutions that are often considered to be necessary for fast and secure screening operations. The rest of the chapter discusses various technical and institutional solutions for exchanging security-relevant information among supply chain operators and relevant government agencies. Especially interoperability of ICT systems seems to be crucial for effective security efforts in the global supply chains. The CASSANDRA compendium is available for download: www.cassandra-project.eu. Review by Toni Männistö (CBRA)

Reference

Hintsa, J. and Uronen, K. (Eds.) (2012), “Common assessment and analysis of risk in global supply chains “, Compendium of FP7-project CASSANDRA, Chapter 8

CORE2007

[/s2If]

CASSANDRA compendium. Private sector perspectives on risk management (Ch. 5) and crime prevention and security management in supply chains (Ch. 6)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Summary: Chapters 5 & 6 of the CASSANDRA compendium provide a general overview on supply chain security risk management from the private sector perspective. Explaining the essentials of supply chain risk management, Chapter 5 introduces commonly used risk management models and tools (e.g., risk matrices and risk registers), discusses various classifications of supply chain risks, and elaborates current trends of risks and risk management in the supply chain context. Chapter 6 focuses on specific challenges of supply chain security risks – the risks that arise from intentional, man-made criminal activities such as terrorism, theft, trafficking, and sabotage. The chapter explains a few early classifications of supply chain security risks (e.g., motive-based typology and taxonomies based on private sector perspectives). Following the classifications of security risks, the chapter puts forth a few models for managing security risks in the supply chain context (e.g., the 8-layer model for supply chain security management). The chapter concludes with a detailed case study on security management of an international security company and a comparison of supply chain security management and the total quality management (TQM) management philosophy. The CASSANDRA compendium is available for download: www.cassandra-project.eu. Review by Toni Männistö (CBRA)

[s2If is_user_logged_in()]

Full review: Previous observatory entries have already shown the relevance of the CASSANDRA compendium to the community of supply chain management professionals. The compendium’s chapters 5 & 6 give a brief summary of risk management and security risk management in the context of international supply chains. The contents of the chapters are relevant and useful for people involved in FP7 CORE project, especially for those involved in work packages 3 (Multi-method Threat and Vulnerability Analysis Suite) and 4 (SC Situational Awareness Tools & Maps).

Chapter 5 elaborates a set of common supply chain risk management tools. The model of Waters (2007) summarises rather obvious three steps of the risk management process: identifying risks, analysing risks and responding to risks. The model proposes, for example, that managers can identify supply chain risks through analysis of past events, collection of opinions, and through operational analysis. The model also calls for managerial attention to prerequisites of successful risk management – mutual trust, cooperation and information exchange among relevant stakeholders involved in supply chain management – and highlights importance of continuous monitoring and controlling the risk management process. The chapter concludes with the four classic approaches to risk management: risk avoidance, risk reduction, risk transfer (e.g., insurance and contractual agreements), and acceptance. The classifications of supply chain risks include typologies focusing on risk sources (natural hazards operational failure and terrorism), risk consequences (e.g., risk to operations, risk to reputation and risk to profits), and objects of vulnerability (e.g., information, materials, personnel and financial flows).

The chapter on crime prevention and security management (Ch. 6) in supply chains provides a concise summary on supply chain security management from the private sector perspective. The chapter starts by describing some early classifications of supply chain security risks. A motive-based taxonomy classifies such risks into the three categories: economic crime (profit as motive), other crime types (ideological, emotional and other reasons as motive) and facilitating crime that covers activities that do not bring direct crime benefits but help committing other rewarding crime crimes later on. (e.g., document fraud, bribery and use of intimidation). The chapter’s next section elaborates ways to mitigate security risks in the global supply chains, highlighting the key ideas of the so-called 8-layer model for supply chain security management (the model incorporates multiple aspects of risk assessment, hands-on design and planning, implementation of a variety of technologies, procedures, and incentives as well as preparation for dealing with the consequences of supply chain crime). The chapter provides also a case study with an international tobacco company that runs high security risk supply chain operations. The section also contrasts, rather interestingly, principles of security management against the fundaments of the total quality management (TQM) management philosophy. The chapter continues with a brief review of regulations (e.g., EU customs security and aviation security regulations) and standards on supply chain security management (World Customs Organization’s SAFE framework of standards, and industry standards of the Transported Asset Protection Association).

Reference

Hintsa, J. and Uronen, K. (Eds.) (2012), “Common assessment and analysis of risk in global supply chains “, Compendium of FP7-project CASSANDRA, Chapters 5 & 6

CORE2007

[/s2If]

Governmental actors in supply chains & Governmental procedures, compliance and risk management – CASSANDRA Compendium Chapters 4 & 7, 2012 (CORE2007c)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Summary: The fourth and seventh chapters of the CASSANDRA compendium elaborate on the roles of government agencies in international logistics and supply chain security (SCS). A broad range of government actors – customs, police agencies, border guards and many others – play a crucial role in enforcing and facilitating cross-border traffic through the global supply chains. These government agencies are critical stakeholders to be involved in the development, design and implementation of the two central CASSANRA concepts: the end-to-end data pipeline and the risk-based approach to cargo inspections and company audits. The CASSANDRA compendium highlights that there are important differences in the national laws and regulations, even within the European Union, that complicate international government collaboration. The differences in the legal framework and organisational cultures must be taken into account when designing new SCS solutions in the CASSANDRA and other projects. The CASSANDRA compendium is available for download: www.cassandra-project.eu. Review by Toni Männistö (CBRA)

[s2If is_user_logged_in()]

Full review: The CASSANDRA compendium describes how the role of government agencies in the cross-border supply chain operations is changing. The trading community and high-level policy-makers are strongly advocating trade facilitation, to make international commerce faster, more cost-efficient and less cumbersome. To address the demand for trade facilitation, many border control agencies are adopting risk-based approaches for controlling cross-border trade and travel. They exploit information increasingly to identify and target high-risk cross-border movements while facilitating low-risk traffic. To further lowering administrative hurdles to the cross-border trade, many government agencies are eliminating duplicative and redundant reporting requirements and building modern ICT systems to enable fast and reliable digital exchange of data and information.

Many law enforcement agencies are also facing budget cuts and increasing work loads, which forces them to look for new ways to increase productivity. Increased collaboration among border control agencies has been proposed as a solution for boosting productivity. The efforts towards further coordinated border management (CBM) are clearly manifested as joint-border control posts, regional single window systems (an online interface enabling trading companies, customs and other border control agencies to exchange trade-related information) and mutual recognition agreements (MRA) that harmonize customs and security related regulatory requirements across jurisdictions.

Reference: Hintsa, J. and Uronen, K. (Eds.) (2012), “Common assessment and analysis of risk in global supply chains “, Compendium of FP7-project CASSANDRA, Chapters 4 & 7

 

CORE2007

[/s2If]

Supply chain security education materials

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Blog-29.02.16FP7-CORE is the European flagship research and development project in supply chain security and trade facilitation, running from May 2014 to April 2018. In today´s CBRA Blog we focus on education and training material development – Work package 19, Task 19.1 – in the CORE-project.

The CORE Task 19.1 – Education and training materials development – has an impressive set of partners: INTERPOL, World Customs Organization (WCO), European Shippers Council (ESC), European association for forwarding, transport, logistics and customs services (CLECAT), International Road Union (IRU), and Technical University of Delft (TU Delft) as the established big players; ourselves Cross-border Research Association (CBRA) as the Task leader (and an enthusiastic lecturing body in supply chain security and trade facilitation); as well as the BMT Group, as the Work package 19 leader. We first started interaction with the entire Task 19.1 team during summer 2014, when the CORE-project had just been kicked off, and everything was still in it´s infancy.

Today, at the end of February 2016 – near two years into the project – we are about to launch the full scale production of the CORE education and training materials. We vision content to be produced in three parallel categories: CORE Flagship Handbook (CFH); Partner-specific materials; and Other education content. Content which is considered to be near-final can be published on-the-fly for example at CBRA´s web-portal, www.cross-border.org , where a new section is planned for the “CORE Education” (like the “CORE Observatory” which has been live since last autumn). Having just over two years left with the CORE-project, we are right on schedule to start the full production of education and training materials!

CORE Flagship Handbook (CFH) will be the main joint outcome of Task 19.1, thus we welcome INTERPOL, WCO, ESC, CLECAT, IRU, TU Delft and BMT to work closely with us in the production, review and piloting of the Handbook. In our current plans the Flagship Handbook has the following four sections, each section having multiple chapters (typically between two and six chapters per section):

  1. Introduction to CORE innovation agenda; including explaining key CORE themes and concepts; and frameworks and models.
  2. CORE outcomes, findings and results – written primarily in the context of the 16 CORE-Demonstrations.
  3. Interpretation of CORE results per key stakeholder group: customs, police, cargo owners, logistics sector, security sector and academics
  4. Future research and development roadmap – focusing on gaps and shortcomings; critical assessment on what works and what doesn’t by the end of CORE-project.

Partner specific materials typically fall into two sub-categories. First one is generic, introductory materials which would be of relevance to 1-2 stakeholder groups – for example Supply chain management 101 for police officers. Such materials can quite easily be developed within Task 19.1, using CORE supply chains and trade lanes as examples. At the same time, such basic education material would not be of relevance for supply chain companies, thus it should not be published in the CORE Flagship Handbook, CFH. Second sub-category is on detailed technical content, which again would be relevant to 1-2 stakeholder groups. An example could be technical review on risk management tools for the logistics sector.

Other education material may consist of the following content buckets, listed in a rough “simple to more complex” -order: Factsheets; Quizzes; Basic case studies; Comprehensive case studies; Videos and animations; Serious games, and so forth. It is still early days to decide what makes sense to develop – and for what we have adequate resources, skills and budgets. Maybe we will start with some simple factsheets, quizzes and basic case studies – this is still to be discussed among Task 19.1 partners.

Finally, the plans regarding the CORE Education web-portal are still in a preliminary stage. We could have a simple dropdown menu at www.cross-border.org , for example with the following selection options: Introductory materials; Technical sections; and Factsheets & quizzes. In the last category we could share first outcomes of Task 19.1 work. Here, just like in all other aspects of CORE Task 19.1, we welcome ideas and feedback from the Task 19.1 team, and from the whole CORE Consortium – and even beyond, from any interested stakeholders and potential future users of CORE Education materials!

In Lausanne on 29.2.2016 – CBRA Blog by Juha Hintsa

Professor Guido Palazzo on illicit waste supply chains

/0 Comments/in , , , , , , , , , , , , , , /by

Today we interview Professor Guido Palazzo on illicit waste supply chains.

Hi Guido, and thanks for joining a CBRA Interview – can you first tell a bit who are you and what you do?

I am a Professor of Business Ethics at the University of Lausanne since 2003. In my research I focus on the dark side of the force. I examine human rights problems in global supply chains, the driving forces of unethical decision making in organizations and the interface of business and organized crime. In the early 2000s, when I started with my research, business ethics was largely marginalized and perceived as rather irrelevant for both business schools and companies. This has changed dramatically in recent years. Ethical questions have moved center stage.

One of your research project focuses on illicit waste supply chains, particularly in Italy. How bad is the situation there?

Since 25 years, organized crime, in particular Camorra and Ndrangheta are involved in the business of toxic waste recycling. This business is ideal from the perspective of a Mafia organization: Legal risks are negligible and profits are huge. Operating with straw firms they offer their services across Europe up to 90% below the prices of their legal competitors. Obviously, they do not really recycle the waste but simply dump it in South Italy mainly in Campania province, but also in Africa and Eastern Europe. We are talking here about slag and chemicals and tire and other forms of waste from hospitals, garment industry, chemical industry, nuclear industry and so on. The waste includes toxins like cyanide, dioxin, asbestos, chlorines and includes also nuclear waste. Since 25 years, millions of cubic meters of such waste have been dumped in a region which the Romans once called Campania Felix for its fruitful soil. Billions of Euros of profit have been made and laundered by banks in Zurich, London and New York. And the most amazing think is that until recently, this destruction of one of the most beautiful regions of Italy occurred in complete silence. Now, toxins have arrived at the ground water and cancer rates of people living around the waste dumps explode.

Sad and interesting – at the same time – to hear about this… If I recall correctly, I gave you couple of months ago a copy of the FP7-CWIT project´s final report – with recommendations and a tangible roadmap to better mitigate risks of illegal activities in electronic waste… Do you foresee opportunities for similar research projects in the field of toxic waste trade, supply chains and logistics?

We do indeed need a similar research project in order to better understand the journey of illegal waste through Europe and the critical points in the supply chain of toxic waste recycling where organized crime interferes. We need public awareness for the urgency of the problem, develop a better regulatory governance around waste recycling and impose a compliance system on companies so that the existing silent collusion can be stopped.

Thanks Guido for this enlightening interview; and let´s start working together – as UNIL, CBRA and other partners – towards future research funding & project, on this crucial environmental and human health protection topic!

Dr. Federico Magalini on waste logistics crime

/0 Comments/in , , , , , , , , , , , , , , , /by

Hi Federico, and thanks for agreeing to join a CBRA Interview, as the first expert in year 2016 – can you first tell a bit who are you and what you do?

Thank you for the opportunity of sharing some of the past experiences and projects done, including those with CBRA and looking ahead into the next years. I’m a mechanical engineer as background, with a PhD in Management, Economical and Industrial Engineers and I am working as Associate Programme Officer at United Nations University – Vice-Rectorate in Europe. I’m in particular working for SCYCLE, SCYCLE operating unit of the UN University Institute for the Advanced Study of Sustainability.

Can you explain more on what is the United Nations University, UNU?

UNU is, despite the name, not a classical university as many might think. The United Nations University (UNU) is a global think tank and postgraduate teaching organization headquartered in Japan. The mission of the UN University is to contribute, through collaborative research and education, to efforts to resolve the pressing global problems of human survival, development and welfare that are the concern of the United Nations, its Peoples and Member States. We work a lot with leading universities and research institutes in various countries, functioning as a bridge between the international academic community and the United Nations system. Our operating unit SYCLE is particularly devoted to research in the field of electronic waste.

UNU, INTERPOL, CBRA and other partners finished few months ago a 2-year research project on electronic waste crime and non-compliance, the FP7-CWIT –project. From your perspective, what were the most important outcomes of that project?

The CWIT project contributed in my opinion to increase the general understanding of volumes of electronic waste annually arising in different EU Member States and the fate of the disposed equipment. Knowing the baseline of products annually discarded by EU citizens is a first, fundamental step to allow policymakers and stakeholders at large to develop a strategy to ensure proper collection and treatment. In addition to that the project described the main drivers behind the flows diverted from the actual take back and recycling systems across the EU.

A second important outcome of the project is the analysis and identification of the main crime patterns that are typical of such an Industry: in the illegal trade of WEEE, there is a varying degree of compliance and criminality that spans across a continuum ranging from minor unintentional violations or non-compliance by individuals to deliberate illegal activities following a criminal business model. The organisational structure differs by country and region, from individual traders to structured criminal groups.

The combination of those two elements – knowledge of the market and understanding of criminal behaviours – allowed drawing a roadmap for future improvement in compliance and enforcement.

Do you believe that some of the CWIT outcomes will have practical positive impacts to reduce future crime and non-compliance, in the broader context of e-waste handling and management?

I sincerely hope so. And I am sure this will happen. To which extent is hard to predict but in the second part of the project we really focused on how to derive practical recommendations for the various actors involved along the entire value chain. And we broadly discussed the ideas, in many cases deriving from real cases and best practices, with various stakeholders; I hope this will increase the likelihood of having some of the recommendations actually implemented.

We committed ourselves to disseminate the recommendations beyond the project duration and we have seen already some results, with the project findings being discussed in various fora, conferences and public events, including some internal meeting with EC officials. And we have seen official request from some Members of the EU Parliament, who quizzed the EC on the consequences of the CWIT project, challenging here to take concrete actions.

Now we are launching a new project called DOT.COM WASTE – with several CWIT partners, and few new partners. You are the project manager for this “CWIT follow-up” –project, congratulations on that. Can you please explain what this new project aims to achieve?

I am really happy of the DOT.COM waste project as combines some of the results of the CWIT project, particularly the recommendation on the need of better training of enforcement and prosecutors in one of the main areas of my personal interest and work at UNU: capacity building. The DOT.COM WASTE project seeks to increase the capabilities of law enforcement agencies, customs and port authorities, environmental agencies and prosecutors to fight cross-border waste crime more cost-effectively. To achieve this objective, the project aims to increase the stakeholders’ understanding of current waste crime trends and to identify and share good practices for detecting, investigating and prosecuting waste crime activities.

Which aspect of the DOT.COM WASTE project you see as the most challenging one?

I see two main challenges ahead for the DOT.COM WASTE project. The first one is related to the scope of the project itself: there are many waste streams and the challenges of different streams are different. As a consequence also the tools to tackle illegal activities might vary: we will have to identify the priorities in order to be effective.

The second one is related to the duration of the project; the project will translate the knowledge gained into training material and tools and will promote training sessions to help key stakeholders integrate good practices into their day-to-day operations. The project’s underlying objective is to intensify international collaboration through development and implementation of new mechanisms for information exchange, technology transfer and operational coordination. But I really hope that all those efforts will produce effects that will last longer than the two years of the project itself.

I sincerely hope that we will be able to make the difference here!

Thanks a lot Federico for this interview – and talk to you soon at the DOT.COM WASTE kick-off meeting.

Introduction to Supply Chain Management (CASSANDRA Compendium Chapter 2, CORE2007a)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Summary

The second chapter of the CASSANDRA compendium gives a general outlook on the theory and practice of modern supply chain management. Written in lay-man’s language, the text explains a broad range of strategies for managing supply chains, from lean management to agile and responsive logistics. The chapter also defines fundamental supply chain terminology and discusses current trends in the logistics, including synchromodality, use of 4PL logistics service providers, and green logistics. The chapter introduces several supply chain reference frameworks that illustrate a series of interdependent activities and stakeholders involved in the international transport of cargo. The CASSANDRA compendium is available for download here.

Review by Toni Männistö (CBRA)

[s2If is_user_logged_in()]

Full review

The compendium summarizes the SCOR and UN/CEFACT supply chain models, that may be the two most used logistics reference frameworks in the world. The document also discusses less known academic conceptual models that seek to simplify the complexity of supply chain management by categorizing and explaining management strategies, activities, stakeholders and their roles and responsibilities. The section on the future trends in logistics offers a great outlook on the most likely changes and driving forces in the logistics industry. The outlook suggests that for example synchromodality (increased flexibility in transport mode selection), green logistics (less emissions), use of 4PL logistics service providers (outsourced supply chain management), and continuously increasing ship and port sizes will reshape the cross-border logistics over the years. The document also explains key CASSANDRA concepts and their impacts on international supply chain management. For instance, the Data Pipeline, a pivotal CASSANDRA concept, seeks to enhance sharing of information across supply chain stakeholders, in particularly from business operators to customs and other border control authorities. Most importantly, the Data Pipeline would allow customs officers to access commercial information, that normally is exchanged only between buyers and sellers, early in the upstream supply chain at the consignment completion point (CCP). This accurate, early commercial information would enable the customs and other border control agencies to assess security and other risks of cargo early on.

All in all, the document provides a crash refresher course on basic and advanced logistics terminology that would be beneficial for many the CORE consortium, especially for those partners whose expertise is mainly outside the logistics industry. The CORE demonstrators benefit from descriptions of CASSANDRA innovations that support information exchange and improve visibility across the supply chain. The demos might choose to reuse some of these CASSANDRA innovations or their components. The CASSANDRA compendium also contains a great deal of material that could be reused for education and training purposes in CORE (WP19). Finally, the chapter concludes with recommendations that are relevant also for CORE. The chapter recommends, for example, that because of broad variety of international supply chains, CASSANDRA solutions should be adaptable for different contexts.

Reference

Hintsa, J. and Uronen, K. (Eds.) (2012), “Common assessment and analysis of risk in global supply chains “, Compendium of FP7-project CASSANDRA, Chapter 2

CORE2007

[/s2If]