SIECA delegation visiting Europe in June 2015

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

I had a great pleasure to be the lead host for a 12 person SIECA delegation visit to Europe in June 2015. We spent two days in the Netherlands, one day in Belgium and two days in Switzerland in an action-packed tour, visiting several border areas, governmental offices and beyond.

The idea to organize a one-week customs and international trade visit tour to Europe first came when Mr. Roman Stoll from the Federal Customs Administration of Switzerland and I paid a four-day visit at the SIECA Secretariat in Guatemala City in March 2015. There we had several meetings and discussions on World Trade Organization´s Trade Facilitation Agreement, WTO TFA, implementation plans with the SIECA management – Ms. Carmen Gisela Vergara Mas and Mr. Javier Gutierrez; with Customs management and experts from all the six SIECA member countries; and with representatives of the Intra-American Development Bank. Some weeks after the Guatemala-visit, SIECA and IDB confirmed the willingness to come over to Europe, to learn about good practices in international trade, supply chain and border management in the Netherlands, Belgium and Switzerland. And after couple of hundreds of emails and phone calls – myself acting as the focal point in arranging the visit – we were ready to welcome the SIECA Delegation to Europe between Monday 1 June and Friday 5 June, 2015.

blog 22.03.20161Monday-Tuesday we had a full agenda in the Netherlands. Monday started by presentations on Dutch Customs in general, and Schiphol Customs in specific, focusing on risk management, coordinated border management, and the SmartGate solutions at the Schiphol Airport. This was followed by a roundtable discussion with representatives from the Dutch Ministries of Foreign Affairs and Economic Affairs, as well as with an expert from the air cargo industry. During Monday the SIECA delegation gained firsthand knowledge for example on One-Stop Shop (OSS) implementation steps in the Netherlands: Step 1. Information exchange; 2. Joint inspections; 3. Training specialists; 4. Joint risk analysis by both inspections and selection by Customs; and Step 5. One inspection inspects for the other. The program on Tuesday consisted of a tour in Port of Rotterdam, at the APM 2 Container terminal; as well as a visit to the Central command post of nuclear detection and an X-ray container scanner. In between we had a typical “Dutch sandwich” lunch, kindly offered by the hosts. The delegation enjoyed seeing the ultimate high level of automation at the new container terminal, as well as visiting a pragmatic “one stop inspection room”, where multiple border agencies work together inspecting containers flagged for manual inspections.

Wednesday was spent in Brussels, Belgium. In the morning, the trade representatives of the SIECA Delegation went to the European Commission, DG TRADE, for EU-SIECA related discussions. In the afternoon, most of the delegation visited the World Customs Organization, where the meeting started with discussions with the WCO Secretary General Dr. Kunio Mikuriya and the WCO Deputy Secretary General Mr. Sergio Mujica. This was followed by a presentation on WTO Trade Facilitation Agreement and the linked WCO Instruments, by Ms. Heike Barczyk, the Deputy Director of Compliance and Facilitation Directorate at the WCO. Lastly, we had a brief presentation and roundtable discussions on the European Flagship Supply Chain Security Research, Development and Demonstrations project called FP7-CORE. This discussion was joined by Mr. Nik Delmeire, the Secretary General of the European Shippers Council; Ms. Nicolette van der Jagt, the Secretary General of CLECAT, the European association for forwarding, transport, logistics and customs services; and myself, Dr. Juha Hintsa, Founder of the Cross-border Research Association. After the meeting at WCO, it was time to fly from Brussels to Basel, Switzerland.

blog 22.03.20162Thursday-Friday we had a packed program in Switzerland. Despite some “navigation challenges” with our three-car convoy, we arrived on time from Basel to Bern at the Directorate General of the Federal Customs Administration. We heard several interesting presentations focusing on performance mandate, tasks and strategy of Swiss Customs; on international affairs section and it’s relevant international cooperation program; on shifts from traditional revenue collection to environmental and incentive taxes; and on strategy and challenges regarding future customs clearance systems and platforms – all this by three top experts from Swiss Customs. I presented the outcomes of Swiss Customs and Cross-border Research Association -visit to SIECA in March 2015, suggesting some specific areas and priorities for future co-operation activities. Next, the Delegation visited the Federal Department of Foreign Affairs, where the discussions focused on Swiss foreign policy in Central America and bilateral cooperation Switzerland – Central America; as well as on political and economic regional integration in Central America. After a quick photo session on the Bundeshaus terrace facing over River Aare, our journey continued towards the Swiss Customs facilities at the Zurich Airport. Again, there were some “logistics challenges” on the way to Zurich, when one of our three cars suddenly lost all engine coolant – fortunately a gas station was close by, and a road service company (car + mechanic) happened to be there. At the Zurich Airport, the SIECA Delegation learned a lot of details about Swiss Customs operations with air cargo and passenger flows. And as the last agenda item, we met a cute black Labrador retriever, who together with his trainer showed how effortlessly he finds illicit goods hidden in air cargo boxes and pallets…

On Friday morning – last day of the journey – we had again an early wake-up call at our hotel in Basel. We were warmly welcomed by Swiss Customs Officers at the Basel/Weil- Motorway border-crossing point – the highest volume customs clearance point in Switzerland. First the hosts explained about facts and figures on Basel/Weil, topped with interesting information on customs risk management processes and IT-systems. Now we all know that on average 3500 trucks cross the Basel/Weil border per day, and that around 600 million CHF is collected annually as indirect taxes at that border crossing point. After that we took a rooftop view over the border area premises, discussing further Import/Export/Transit -procedures, as well as visited the Swiss Transito-Cabins / Checkpoints. From the motorway we drove to the Swiss Customs House at the Basel Port, visiting the famous tri-border-point between Switzerland, Germany and France. There the Delegation learned about the barge traffic on River Rhine – the same river we saw three days earlier at Port of Rotterdam. From the Basel Port, we drove again to Bern, this time to visit the State Secretariat for Economic Affairs, SECO. Lively discussions took place on the SECO rooftop meeting room on topics including EFTA – Central American FTA, as well as Bilateral Economic Relations Switzerland – Central America. And after lunch kindly offered by SECO, we headed towards Geneva for the final meeting of the week: World Economic Forum, WEF, where we all arrived just in time to learn about the organization and the key activities of WEF, including: the work of the WEF in Latin America, with updates from the Latin American Summit; and, the work of the WEF on trade and investment policy and implementation, including Policy Directions, Enabling Trade Index, Enabling Trade implementations. The United Nations Economic Commission for Europe, UNECE, was kind enough to explain about latest developments and trends in single window projects and implementations. And lastly, I shared briefly select work on trade facilitation and supply chain security research and education materials by the Cross-border Research Association and HEC University of Lausanne.  I highlighted the important developments taking place within the FP7-CORE project – referring naturally to our meeting two days earlier at the World Customs Organization.

This concludes the brief summary of the SIECA week in Europe, and now I would like to thank all the SIECA Delegation members for coming over and spending the five days with us, here on the old continent:

  • Costa Rica: Mr. Jhon Fonseca, Vice Minister Foreign Trade; and Mr. Luis Fernando Vasquez Castillo, Costa Rica Customs.
  • El Salvador: Mrs. Luz Estrella Rodriguez, Vice Minister Foreign Trade
  • Guatemala: María Luisa Flores Villagran, Vice Minister Foreign Trade; and Mrs. Maria Elisa Chang, Guatemala Customs.
  • Honduras: Jeronima Urbina, Director of Economic Integration
  • Nicaragua: Eddy Aldolfo Artola Garciá, Director Risk Management of Nicaragua Customs.
  • Panama: Melitón Arrocha. Minister Foreign Trade; Mrs. Diana Salazar, Vice Minister Foreign Trade; and Mr. José Gómez Núnez DG of Panama Customs.
  • SIECA Secretariat: Carmen Gisela Vergara Mas, Secretary General
  • Intra-American Development Bank: Mr. Jaime Granados

And last but not least, warmest thanks to all the local hosts: Dutch Customs Administration; Dutch Ministry of Foreign Affairs; Dutch Ministry of Economic Affairs; European Commission DG TRADE; World Customs Organization; Federal Customs Administration of Switzerland; Federal Department of Foreign Affairs of Switzerland; State Secretariat for Economic Affairs of Switzerland; and World Economic Forum.

CBRA Blog by Juha Hintsa

blog 22.03.20163PS. If your country / region would be interested on a similar European field visit, please contact us – we could organize the practical details for the next delegation, possibly every 1-2 years (of course the actual hosts need to agree to the visit in the first place, that goes without saying…). And one final note: next time a bus and a professional driver need to be rented, please!

 

Supply chain security education materials

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Blog-29.02.16FP7-CORE is the European flagship research and development project in supply chain security and trade facilitation, running from May 2014 to April 2018. In today´s CBRA Blog we focus on education and training material development – Work package 19, Task 19.1 – in the CORE-project.

The CORE Task 19.1 – Education and training materials development – has an impressive set of partners: INTERPOL, World Customs Organization (WCO), European Shippers Council (ESC), European association for forwarding, transport, logistics and customs services (CLECAT), International Road Union (IRU), and Technical University of Delft (TU Delft) as the established big players; ourselves Cross-border Research Association (CBRA) as the Task leader (and an enthusiastic lecturing body in supply chain security and trade facilitation); as well as the BMT Group, as the Work package 19 leader. We first started interaction with the entire Task 19.1 team during summer 2014, when the CORE-project had just been kicked off, and everything was still in it´s infancy.

Today, at the end of February 2016 – near two years into the project – we are about to launch the full scale production of the CORE education and training materials. We vision content to be produced in three parallel categories: CORE Flagship Handbook (CFH); Partner-specific materials; and Other education content. Content which is considered to be near-final can be published on-the-fly for example at CBRA´s web-portal, www.cross-border.org , where a new section is planned for the “CORE Education” (like the “CORE Observatory” which has been live since last autumn). Having just over two years left with the CORE-project, we are right on schedule to start the full production of education and training materials!

CORE Flagship Handbook (CFH) will be the main joint outcome of Task 19.1, thus we welcome INTERPOL, WCO, ESC, CLECAT, IRU, TU Delft and BMT to work closely with us in the production, review and piloting of the Handbook. In our current plans the Flagship Handbook has the following four sections, each section having multiple chapters (typically between two and six chapters per section):

  1. Introduction to CORE innovation agenda; including explaining key CORE themes and concepts; and frameworks and models.
  2. CORE outcomes, findings and results – written primarily in the context of the 16 CORE-Demonstrations.
  3. Interpretation of CORE results per key stakeholder group: customs, police, cargo owners, logistics sector, security sector and academics
  4. Future research and development roadmap – focusing on gaps and shortcomings; critical assessment on what works and what doesn’t by the end of CORE-project.

Partner specific materials typically fall into two sub-categories. First one is generic, introductory materials which would be of relevance to 1-2 stakeholder groups – for example Supply chain management 101 for police officers. Such materials can quite easily be developed within Task 19.1, using CORE supply chains and trade lanes as examples. At the same time, such basic education material would not be of relevance for supply chain companies, thus it should not be published in the CORE Flagship Handbook, CFH. Second sub-category is on detailed technical content, which again would be relevant to 1-2 stakeholder groups. An example could be technical review on risk management tools for the logistics sector.

Other education material may consist of the following content buckets, listed in a rough “simple to more complex” -order: Factsheets; Quizzes; Basic case studies; Comprehensive case studies; Videos and animations; Serious games, and so forth. It is still early days to decide what makes sense to develop – and for what we have adequate resources, skills and budgets. Maybe we will start with some simple factsheets, quizzes and basic case studies – this is still to be discussed among Task 19.1 partners.

Finally, the plans regarding the CORE Education web-portal are still in a preliminary stage. We could have a simple dropdown menu at www.cross-border.org , for example with the following selection options: Introductory materials; Technical sections; and Factsheets & quizzes. In the last category we could share first outcomes of Task 19.1 work. Here, just like in all other aspects of CORE Task 19.1, we welcome ideas and feedback from the Task 19.1 team, and from the whole CORE Consortium – and even beyond, from any interested stakeholders and potential future users of CORE Education materials!

In Lausanne on 29.2.2016 – CBRA Blog by Juha Hintsa

Border Agency Cooperation, Part 3 of 3

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

The last blog in our three-part series on Border Agency Cooperation introduces a conceptual framework capturing the essential dimensions of Border Agency Coordination: three levels of collaboration, four areas of integration and four objects for sharing. We hope that the framework helps the customs and other border agency communities to see all levels of Border Agency Cooperation (BAC) so that they can move from isolated coexistence towards more active cooperation at the borders. Higher levels of cooperation are likely to translate into higher levels of trade facilitation, control over cross-border cargo flows and resource efficiency, simultaneously. Compared with the previous BAC Blog Part 2, this BAC Blog Part 3 intends to present a comprehensive framework surrounding BAC ambitions, plans, implementations and monitoring activities – while the previous BAC Bloc 2 focused purely on a set of 15 key BAC actions, grouped according to the main beneficiary groups. This final BAC Blog has been written by Dr. Toni Männistö of CBRA.

Let’s start by first presenting the BAC diagram: Conceptual framework on Border Agency Cooperation (source: Männistö, T., and Hintsa J., 2015; inspired by Polner, 2011 and by Institute of Policy Studies, 2008)

blog-200516-1

Levels of cooperation

Intra-agency cooperation is about aligning goals and work within one organization, either horizontally between departments or vertically between headquarters and local branches, in particular border-crossing offices / stations. Ways to foster horizontal intra-agency cooperation include development of intranet networks, cross-training, inter-departmental rotation of staff, and establishment of joint task forces that tackle multifaceted challenges like transnational terrorism. Ideally, the vertical cooperation would be bi-directional: headquarters would define priorities and objectives and then communicate them to local branches. The branches would, reciprocally, send back status reports and suggest improvements to the general policies. Solving intra-agency cooperation lays a basis for broader cooperation: it’s hard for any organization to cooperate efficiently with external stakeholders if it struggles with internal problems. The logical first step in coordinated border management is therefore breaking departmental silos and building a culture of cooperation within boundaries of one organization.

Inter-agency cooperation, at the operational level, concerns relationships among a broad range of border agencies that play a role in controlling cross-border trade and travel. In many countries, primary agencies present at the borders include customs, border guards, immigration authorities and transport security agencies. However, also police organizations, health authorities, and phytosanitary and veterinary controllers, among others, take part in border management. According to a recent study, typical areas of customs- border guard inter-agency cooperation can include strategic planning, communication and information exchange, coordination of workflow of border crossing points, risk analysis, criminal investigations, joint operations, control outside border control points, mobile units, contingency/emergency, infrastructure and equipment sharing, and training and human resource management (CSD, 2011). Governmental inter-agency cooperation occurs between border control agencies and ministries and policy making bodies that are responsible for oversight and financing of border management activities.

International cooperation may take place locally at both sides of a border. One Stop Border Posts, OSBPs – border crossings managed jointly by two neighboring countries – are prime examples of such cooperation. One Stop Border Posts can involve various forms of collaboration: harmonization of documentation, shared maintenance of the infrastructure, joint or mutually recognized controls, exchange of data and information and common investments in infrastructure and so forth. Operational arrangements between the Norwegian, Finnish and Swedish customs illustrate advanced international cross-border cooperation that save time and money of border control authorities and trading companies. The cooperation builds on division of labor, where the national border authorities of each country are allowed to provide services and exercise legal powers of their home country and neighboring countries. For instance, when goods are exported from Norway, all paperwork related to both exports and imports may be attended by either Swedish, Finnish or Norwegian customs office (Norwegian Customs, 2011). At the political level, this requires international cooperation between authorities and policy makers in two or more countries. Operational cooperation (e.g., mutual recognition of controls or regional Single Window), often bringing tangible trade facilitation benefits, usually follows from political, supranational decisions (e.g., the WCO’s Revised Kyoto Convention and SAFE Framework of Standards).

Areas of integration

Technical integration often entails improving connectivity and interoperability of information and communication technology systems within and across organizations. Single Window solutions are typical outcomes of technical cooperation as they enable automatic exchange of electronic trade information among border control agencies. The UN Centre for Trade Facilitation and Electronic Business, UN/CEFACT, is an important international organization helping to build connectivity across countries and between business and governmental stakeholders. UN/CEFACT, for instance, develops and maintains globally recognized standards for EDI messages.

Operational integration is largely about coordination of inspection and auditing activities among border control agencies. Benefits of synchronized activities are evident: organizing necessary controls at one place and at the same time reduces delays and administrative burden that trading companies and travelers face at borders. A simple and powerful example of operational integration is coordination of opening hours and days of customs offices at the both sides of a border. Operational integration also covers provision of mutual administrative assistance, joint criminal investigations and prosecution, and sharing of customs intelligence and other information.

Legislative integration seeks to remove legal barriers and ambiguities that prevent border control agencies from exchanging information, sharing responsibilities or otherwise deepening their cooperation. Essentially, most forms of Border Agency Coordination require some degree of legislative harmonization and political commitment. For example, Article 8 of the WTO/TFA to the WTO Members requires that national authorities and agencies responsible for border controls and dealing with the importation, exportation and transit of goods must cooperate with one another and coordinate their activities in order to facilitate trade.

Institutional integration is about restructuring roles and responsibilities of border controls agencies. An example of a major restructuring is the annexing of US border control agencies – including the US Customs and Border Protection, Transportation Security Administration and Coast Guard – into the Department of Homeland Security, DHS, a body that took over the key governmental functions involved in the US non-military counter-terrorism efforts in the aftermaths of the September 11th, 2001, terrorist attacks.

Objects of sharing

Sharing of information – data, knowledge and intelligence – reduce duplicate work (e.g., sharing of audit findings), enable operational coordination (e.g., synchronized border controls) and facilitate development of common agenda for future border agency coordination. At the global level, the WCO’s Customs Enforcement Network CEN is an example of a trusted communication system for exchanging information and intelligence, especially seizure records, between customs officials worldwide. Another WCO initiative, the Globally Networked Customs, analyzes potential to further “rationalize, harmonize and standardize the secure and efficient exchange of information between WCO Members” (WCO 2015).

Resource sharing involves multi-agency joint investments in equipment, facilities, IT systems, databases, expertise and other common resources. The joint investment activities are likely to result in higher resource utilization and bulk purchasing discounts. For example, national and regional Single Window solutions are often outcomes of joint development and investment activities of various government agencies.

Sharing of work is mostly about rationalization of overlapping border control activities, controls and formalities. If two border control agencies, for instance, agree to recognize each other’s controls, there is no need to control the same goods more than once. Combining forces to investigate and prosecute crime also often help border control agencies to use their limited resources more efficiently.

Sharing of responsibilities is about coordinating and streamlining administrative and control tasks among border control agencies. Norway, again, sets a good example of sharing the responsibilities. The Norwegian customs represents all other border control agencies – except the veterinary office – at the frontier. Customs officers are responsible for routine border formalities, and they summon representatives of other border control agencies as and when the officers need assistance. Internationally, the Norwegian customs cooperates closely with Swedish and Finnish border control authorities at the Northern Scandinavian border posts. Bilateral agreements between its neighbors allow Norwegian customs officers authority to perform most customs checks and formalities for and on behalf of their Swedish and Finnish colleagues. The coordination decreases border-crossing times and lowers administrative costs for trading companies and the border control agencies in the three countries.

This concludes now our three-part series on Border Agency Cooperation. In Part 1, we shared an illustrative worst case example on how complex, slow and expensive a cross-border supply chain execution comes when no cooperation takes place between relevant government agencies, neither nationally nor internationally. In Part 2, we presented a conceptual BAC model with 15 key actions to improve the degree of cooperation in a given country or region – for the direct benefit of supply chain companies, or government agencies, or both. And in this Part 3, we finally presented our comprehensive BAC framework, which hopefully helps government policy makers and border agencies to design, implement and monitor their future BAC programs and initiatives in an effective and transparent manner. Toni Männistö and Juha Hintsa.

Bibliography:

Center for the Study of Democracy (CSD), 2011. “Better Management of EU Borders through Cooperation”, Study to Identify Best Practices on the Cooperation Between Border Guards and Customs Administrations Working at the External Borders of the EU.

Institute of Policy Studies 2008, Better connected services for Kiwis: a discussion document for managers and front-line staff on better joining up the horizontal and vertical, Institute of Policy Studies, Wellington, NZ.

Männistö, T., and Hintsa J., “Theory of Border Agency Cooperation”, CBRA working paper 2015, Lausanne, Switzerland.

Norwegian Customs, 2011. Case Study on Border Agency Cooperation Submitted by Norway for the November Symposium.

Polner, M. (2011). Coordinated border management: from theory to practice. World Customs Journal, 5(2), 49-61.

United Nations Conference on Trade and Development (UNCTAD), 2011 Border Agency Coordination”, UNCTAD Trust Fund for Trade Facilitation Negotiations Technical Note No. 14.

Vision and Strategy 2020, U.S. Customs and Border Protection Strategic Plan – Delivering safety, security, and prosperity through collaboration, innovation, and integration 2015 (CORE2010)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Summary

This document sets a vision of the US Customs and Border Protection (CBP), the primary border control agency present at the US borders, for year 2020. The vision builds on four general goals and associated objectives that aim to improve safety, security and prosperity of the American people. Collaboration, risk management as well as exchange and exploitation of information and intelligence are in the heart of the vision document and integral elements of its goals and objectives. The vision document is available at: http://www.cbp.gov/sites/default/files/documents/CBP-Vision-Strategy-2020.pdf

Review by Toni Männistö (CBRA)

[s2If is_user_logged_in()]

Full review

The vision’s first goal is to counter transnational terrorism and crime at and beyond the US borders. Keys to effective counter-terrorism and anti-crime efforts are understanding of threat landscape as well as interagency and international coordination on border management. The second goal is about promoting a comprehensive, whole-of-government approach to border security and management, in order to exploit complementary capabilities of various border control agencies to the fullest extent. Specific objectives underpinning this goal are “situational awareness of the air, land and maritime borders”, “detection, interdiction and disruption of illegal border activities” and “strengthening comprehensive trade enforcement. Here the key is to collect information and intelligence about trade flows and carry out risk assessment to identify and target high-risk cargo movements and facilitate low-risk traffic. Other objectives are strengthening processes to conduct out-bound enforcement and interdiction of travelers and cargo as well as advance a comprehensive, predictive targeting strategy to identify threats as early as possible.

The third goal is about enhancing the US economic competitiveness by facilitating lawful trade and travel. The goal consists of objectives that seek to reduce cost of trade and travel by streamlining customs processes. Other objectives are to harmonize procedures throughout US government agencies and to develop risk-segmentation for better facilitation of low-risk trade and travel. Agility and adaptability of the CBP organization is the fourth goal. Sub-goals, or objectives, include optimization of CBP’s organizational structure, strengthening organizational structure and advance CBP’s effectiveness through technologies and business innovations. The vision document concludes with a presentation of principles and process of risk management in the customs context.

This vision document contains lots of relevant information for many CORE work packages, especially for those that deal with US-bound supply chains (WP9, WP14 and WP17. Certainly, also work packages dealing with risk assessment and educational material benefit from this material. Altogether, revealing strategic priorities of the CBP, the document reflects the trends of customs-centric supply chain security worldwide, and this information is very valuable for CORE and its work packages.

Reference

US CBP, 2015. Vision and Strategy 2020, U.S. Customs and Border Protection Strategic Plan – Delivering safety, security, and prosperity through collaboration, innovation, and integration

CORE2010

 [/s2If]

Border Posts, Checkpoints, and Intra-African Trade: Challenges and Solutions. Barka, H., B., 2012 (CORE2009)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , /by

Summary

Pan-African economic integration has progressed over past years, producing a broad range of regional trade agreements and economic communities that seek to harmonise policies, develop common infrastructure and remove barriers to intra-African trade. Against expectations, however, this increased integration has not translated into strong economic growth in Africa. This article discusses how sub-Saharan countries can overcome trade barriers that undermine the African economic integration. The article’s focus is on border posts and customs procedures that play a key role in facilitating cross-border traffic.

According to the article, the problems of international trade in Africa are largely explained by inadequate infrastructure that creates congestion and limits connectivity, delays that stem from complex and manual customs procedures, corruption and by illicit trade. One-stop-border-posts are a promising approach to streamline customs procedures and curb corruption. The joint border post may bring trade facilitation benefits as significant as costly investments on roads, ports, bridges and other transport infrastructure. The articles highlights the Chirundu One-Stop Border Post between Zambia and Zimbabwe as a successful case of border agency cooperation. Previous Observatory review (CORE2008, 20 January 2016) describes the Chirundu border crossing in more detail.

The paper concludes by suggesting One-Stop-Border-Post as a promising way towards higher trade facilitation and African integration. To organise one-stop-border-post, the first thing to do is to analyse roles and procedures of different border control agencies. The task of high-level governance is to define how responsibilities across the various border control agencies are harmonised, coordinated and delegated. Metrics and statistics should underpin the design, as numerical data into traffic flows and clearance times are likely to reveal the major bottlenecks in the cross-border traffic. Finally, the article proposes extended exchange of information and data across government agencies, domestically and internationally. The article is available at http://www.afdb.org/fileadmin/uploads/afdb/Documents/Publications/INTRA%20AFRICAN%20TRADE_INTRA%20AFRICAN%20TRADE.pdf

Review by Toni Männistö (CBRA)

[s2If is_user_logged_in()]

Full review

The discussion on one-stop-border-posts in the African context is closely related to the CORE project and its many work packages. Especially the WP12, the demonstrator Schipol, that deals with imports of fresh cut flowers from Kenya to the Netherlands, benefits from the insights into African bureaucratic practices at many African borders. The demonstrator should consider the set of recommendations for higher border agency cooperation that the article proposes. Besides the demonstrators, the article provides a concise and informative outlook on international in Africa. At least CORE’s WP19, should consider the African perspective on cross-border trade when developing training material.

Reference

Barka, H., B., 2012. Border Posts, Checkpoints, and Intra-African Trade: Challenges and Solutions. African Development Bank

CORE2009

[/s2If]

Updates on Customs brokers, by Ms. Carol West

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

int-300116-1Hi Carol, and thanks for joining a CBRA Interview – can you first tell a bit who are you and what you do?

I am the President of the Canadian Society of Customs Brokers and the Secretary of the International Federation of Customs Brokers Associations, IFCBA. My office is in Ottawa, Canada. I have spent my professional life in the world of Customs, border management and trade facilitation. I am an advocate for the value and importance of customs brokers and I am passionate about the possibilities of Customs-business partnership, in Canada and worldwide. I believe strongly that building knowledge, investing in technology and managing relationships are critical to effective border management.

IFCBA and CBRA produced jointly the first survey study on future roles of customs brokers around 2004-2005. Looking now, in 2016, at the study outcomes: do you see that anything has changed or evolved in the “world of customs brokers” the way we anticipated a decade ago?

It is difficult to generalize as the role of a customs broker still differs so much between countries. The regulatory framework for licensing customs brokers and their scope of practice may be different, and the level of automation of a country’s Customs administration may influence the role of customs brokers in effective border management. Having said that, I believe that in the last decade the role of a customs broker as a trade facilitator has been even more effective than we had anticipated. Both importers and Customs recognize that knowledgeable, regulated customs brokers not only provide expedited navigation through and compliance with complex Customs requirements, they are widely used by businesses looking to reach new markets, with a minimum of cost and delay.

With Customs administrations automating their systems for risk management and implementing coordinated border management processes, there is also more focus on gathering information on the goods being imported prior to arrival, for admissibility and security purposes. In this context, the automation of carrier and cargo information is more important than it was ten years ago. With that in mind, the role of a customs broker is even more crucial today as the broker acts as a hub for all the data relating to a client’s transaction, ensuring its accuracy and compliance with Customs requirements.

Ten years ago, we thought that, by now, we would have made more progress with consistency of data requirements globally. There has been great work done by the World Customs Organization with its data model, but we still find that data requirements are not as harmonized or standardized as they could or should be.

From a business process standpoint, where licensed customs brokers exist they are used by the majority of importers – large multinational companies as well as small to medium enterprises. In a competitive marketplace, customs brokers are seeing more emphasis on performance measurement and key performance indications during the procurement process as well as in standard operations. Today, there is greater uncertainty in the business environment and increased complexity of the global supply chain. We think this also reflects the maturation of the brokerage industry where business managers focus on continuing improvements to their processes to reach maximum efficiencies in delivering value to clients.

By the way, are you aware of any recent research focusing on customs brokers, either on global or on national level?

The World Customs Organization, WCO conducted a survey of its members in 2015 on the subject of customs broker regulation and had an outstanding response rate. With many models of customs broker regulatory regimes among the WCO members, from no regulation to the mandatory use of a licensed customs broker, the results of the survey point to some opportunities for cooperation between Customs administrations and customs brokers, and, based on existing best practices, suggests considerations for a model for establishing a broker licensing system, particularly valuable where none exists today. It also offers ideas on engagement with customs brokers and other private sector players to enhance compliance and trade facilitation. We see this as a positive indicator of interest in issues that are of critical importance to the international customs broker community, and a sign that there is value in doing some additional work in this area.

From a customs broker’s perspective, which areas of global trade facilitation and supply chain security do you see as most important in 2016? What about the most difficult or challenging ones?

A very important development that might impact global trade is the Trans-Pacific Partnership, TTP. I say might because coming into force depends on the US Congress ratification of the agreement, and currently the rhetoric coming from Washington shows little support for it. I guess we’ll have to wait and see what happens. But assuming the TPP is ratified by the 12 signatories, even though it means elimination of tariffs and tariff barriers, it also means a more complex environment to navigate the multiple free trade agreements for the multi-national importers. Customs brokers as experts in rules of origin and compliance, in general will continue playing a very important role in the trade chain.

Looking a bit further out, one of the most challenging issues of the next 5 years will be the immense growth in e-commerce globally, and the pressure put on governments world-wide by online retailers to increase the de-minimis thresholds. It is projected that the online sales will reach US $3.5 trillion by 2020. That represents a lot of import duties that may not be collected and remitted if the de-minimis thresholds are increased or standardized. We expect that the impact of this will be seen differently depending on positions taken by national administrations given their own economic situations and pressures for competitiveness. Customs brokers will no doubt integrate any such changes into their compliance models and service offerings, keeping their clients’ interests and obligations foremost.

We can’t speak of challenges without mentioning the global trade slowdown we’ve experienced since the 2008 global financial crisis. Many factors seem to be contributing to the continued sluggishness which some consider cyclical others structural in nature. Regardless, governments have to remember that trade can be a powerful tool in their policy toolkit and customs brokers are natural allies in promoting its growth.

Any other greetings you would like to send to the CBRA Interview and Blog readers?

IFCBA will be holding its next World Conference in Shanghai 17-21 May, 2016, and the theme is “Facilitating Trade Through the Customs-Business Connection”. Hundreds of delegates from all regions of the world will be in attendance representing national customs brokers associations, international customs organizations such as the WCO, freight forwarding firms, shipping companies, cross-border e-commerce associations, world logistics enterprises, and many more. Our conferences are held only every two years, and we are very excited about sharing ideas and strategies for success with business and government colleagues from around the world.

Thanks a lot Carol for this concluding note – we just added the IFCBA World Conference to CBRA´s Events calendar – and thanks for the whole interview; maybe we can explore bit later this year on joint research, training or other project opportunities…!

 

Web-resources:

http://ifcba.org/

http://www.wcoomd.org/en/topics/facilitation/resources/~/~/media/234D5143B2344B918496C93F24B48586.ashx

https://www.internetretailer.com/2015/07/29/global-e-commerce-set-grow-25-2015

http://bruegel.org/2015/08/the-global-trade-slowdown-puzzle/

https://www.wto.org/english/news_e/pres15_e/pr752_e.htm

https://globalconnections.hsbc.com/global/en/tools-data/trade-forecasts/global

https://www.imf.org/external/pubs/ft/weo/2016/update/01/pdf/0116.pdf 

Related CBRA studies:  

Gutierrez, X., Hintsa, J., Wieser, P. and Hameri, A.P. (2005), “New roles for customs brokers in international supply chain”, Proceedings of First International Conference on Transportation Logistics (T-LOG), July 27-29, 2005, Singapore.

Hintsa, J., Mohanty, S., Tsikolenko, V., Ivens, B., Leischnig, A., Kähäri, P., Hameri, A.P., and Cadot, O. (2014), The import VAT and duty de-minimis in the European Union – Where should they be and what will be the impact? Final Report, Brussels, Belgium.

Border Agency Cooperation, Part 2 of 3

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Our second blog on Border Agency Cooperation (BAC) focuses on a conceptual model developed by CBRA. We have crafted this “CBRA-BAC15” diagram to visualize a set of key BAC actions and primary beneficiaries, with contributions by Dr. Toni Männistö (supply chain security post-doc researcher at CBRA), Mr. Gerwin Zomer (TNO, technical manager for the FP7-CORE project) and by Ms. Susana Wong Chan (education and training materials developer at CBRA).BAC-1

The diagram is cut to three sectors: on left side, the supply chain companies are the primary beneficiaries of BAC actions; on the right side, the government agencies form the primary beneficiary group; and on the bottom area, both supply chain companies as well as government agencies benefit from BAC actions. Each of these three sectors contains five examples of concrete border agency cooperation actions – 15 in total – explained in a moment by using real examples, whenever available in the literature or by expert suggestions. In the center of the diagram lies a circle with the more generic “smart cross-border improvement actions”, applicable to virtually any work in global trade facilitation.

The diagram should not be considered exhaustive, when it comes to all optional actions to improve BAC in a given country or region or globally. Some of the 15 key actions may be strongly interconnected, or, partially overlapping. Some of them may apply mainly on national multi-agency environment, and some of them mainly on international e.g. customs-to-customs environment. Also, the division of the key actions into the three beneficiary groups can and should be challenged, by the interested audiences. But, let´s start now by listing and illustrating the key 15 BAC actions:

Supply chain companies as the primary beneficiary (left sector in the diagram). The following five BAC actions can bring immediate benefits to the companies operating in supply chains, in terms of saving administrative costs and speeding up the supply chain – less work dealing with various certifications and audit visits, less variation and IT costs with import/export data filing and less waiting times at the borders.

  • Harmonized ´trusted trader´ & other certification programs: In the European Union, the European Commission´s implementing regulation (No. 889/2014) updates the references to the aviation security legislation in force, including recognition of the Known Consignor (KC) status and its relevance to Authorized Economic Operator (AEO), and framing the scope of recognition of the common requirements between the respective programs.
  • Coordinated company visits & audits: Closely linked to the previous BAC-action, in the Netherlands, the Dutch Customs executes joint audits on AEO security (customs) and known consignor/regulated agent (air cargo) with the Dutch Immigration and air-police agency – during the application phase, as well as during periodical audits.
  • Harmonized data filing requirements: Despite a global, harmonized data model, harmonized tariff codes and standards on clearance procedures, there are many differences in operational import, export and transit procedures and information requirements between countries. This results in additional complexity of IT systems for globally operating traders and logistic service providers. An example is the pre-arrival security declarations, where harmonization would be most useful e.g. between the Importer Security Filing, “10+2” in the US and the Entry Summary Declaration in Europe – Multiple Filing, supported by Standard Trader Interface, under development within the Union Customs Code, UCC.
  • Synchronized border interventions & inspections: The Article 4 of the Greater Mekong Sub-region Cross Border Transport Agreement on Facilitation of Border Crossing Formalities calls upon the contracting parties to progressively adopt measures to simplify and expedite border formalities by carrying out joint and simultaneous inspection of goods and people by respective competent authorities of agencies such as customs, immigration, trade, agriculture, and health. It further provides for single-stop inspection and urges the national authorities of adjacent countries to carry out joint and simultaneous inspections.
  • Harmonized operating hours: This applies particularly in the context of two neighboring country customs offices – having same opening hours across the border helps to maximize the daily throughput volumes. As the Article 8 of the World Trade Organization´s Trade Facilitation Agreement puts it, “Each Member shall, to the extent possible and practicable, cooperate on mutually agreed terms with other Members with whom it shares a common border with a view to coordinating procedures at border crossings to facilitate cross-border trade. Such cooperation and coordination may include: … alignment of working days and hours … “. In the ASEAN region, the Article 7 of the ASEAN Framework Agreement on the Facilitation of Goods in Transit urges the contracting parties to “coordinate working hours of the adjacent border posts”.

Government agencies themselves as the primary beneficiary (right sector in the diagram). The following five BAC actions can provide instant benefits for the cooperating government agencies, in terms of cost savings and improved efficiency – in other words, identifying more violations and catching more bad guys with less total spending.

  • Sharing of agency intelligence, information & data: Customs Mutual Assistance Agreements (CMAAS), signed bilaterally by Canada Border Services Agency (CBSA) and eight counterparties during years 1979-2010 (European Community, France, Germany, Mexico, the Netherlands, South Africa, South Korea and the United States) provide Canada with a legal basis to share customs information to prevent, investigate and combat customs offences, particularly customs fraud, and to provide reciprocal mutual assistance to ensure the proper application of customs laws. Under CMAAs Canada may share customs information pertaining to: persons, goods and means of transport; activities planned, on-going, or completed, that constitute or appear to constitute a customs offence in the territory of the country requesting the data; proven law enforcement techniques; new and emerging trends, means or methods of committing customs offences; and facilitation of risk assessment activities, within the mandate and authority of the CBSA.
  • Joint investments in common resource pools (equipment, facilities etc.): In Finland the Customs Administration and the Border Guard share common premises and equipment. Each authority has a designated role in the servicing and maintenance of the equipment. X-ray machines are largely the responsibility of Customs. Road-testing equipment, such as lorry brake-testing pads, is also maintained by Customs. All equipment can be shared and operated by each agency upon request. Thus, although the equipment belongs to one agency, it can be easily relocated to the other agency, enabling smoother processing of the workflow without unnecessary and lengthy administrative procedures, thereby reducing costs.
  • Joint teams: In the Netherlands, “HARC” – Hit and Run Cargo Rotterdam team, is a joint operation of Dutch Maritime Police, Dutch Customs, the Fiscal and Economic Crime Agency and the Ministry of Justice collaborating operationally in narcotics enforcement. Joint teams differ from Joint operations below by being a long-term / permanent set-up; while Joint operations “come and go”.
  • Joint operations: A joint operation Meerkat, (23-27 July 2012) involving the World Customs Organization and INTERPOL against the illicit trafficking of cigarettes, tobacco and alcohol in East and Southern Africa, resulted in the seizure of tons of illicitly traded products in seven countries. Operation Meerkat saw Customs and police authorities carry out some 40 raids at seaports, inland border crossing points, markets and shops in Angola, Kenya, Mozambique, Namibia, South Africa, Tanzania and Zimbabwe. More than 32 million cigarettes – equivalent to 1.6 million packets, 134 tons of raw tobacco and almost 3,000 liters of alcohol were seized, resulting in national authorities initiating a number of administrative investigations into tax evasion and other potential criminal offences.
  • Collaborative criminal investigations & prosecutions: In the United States the Border Enforcement Security Task Force (BEST) units gather officers from more than 100 different law enforcement agencies under one roof. The objective is to identify, investigate, disrupt and dismantle transnational organizations posing the greatest threat to border security, public safety and national security, by employing the full range of federal, state, local, tribal and international law enforcement resources. Over the years, the BEST has become a successful interagency law enforcement collaboration model that’s keeping the US safer.

Both supply chain companies as well as government agencies as beneficiaries (bottom sector). The five BAC actions can bring instant benefits to all parties in cross-border supply chains, in terms of lowering costs and improving performance, from supply chain company and from governmental agency perspectives.

  • ‘Single window’ -type import/ export/ transit data submissions: In the Netherlands, the authorities have designed Digipoort, the government’s ‘electronic post office’ for businesses. It provides the communication infrastructure for the exchange of digital information between companies and government authorities. Digipoort enables companies to submit import and export information at a single entry point aimed at multiple government authorities.
  • Common risk indicators, risk profiles & targeting systems: In Finland, common databases are linked to the different agencies’ operational and risk management databases, leading to a common approach when a ‘signal’ is recorded. Some control and enforcement officers have access to each other’s systems on a need-to-know basis, with levels of restricted access determined by rank and functional responsibility.
  • Mutual recognition of supply chain inspection procedures & outcomes: As part of the European Union funded research and development project FP7-CORE ( http://www.coreproject.eu/ ), the phytosanitary and customs administrations in Kenya and the Netherlands are working towards mutual recognition of controls carried out by Kenyan authorities, as well as the exploitation of digital phytosanitary certificates and other trade documents, between the two countries. Outside of the research world, mutual recognitions (MR) of customs inspections are being explored in the context of EU MR Agreements, for example with Japan.
  • Cross-training and empowering manpower: In Finland, Customs officers have been trained by the Border Guard to inspect identification documents and visas, among other procedures. Border guards have, in turn, received basic Customs training, which includes the search of vehicles and the recognition of prohibited and restricted goods, such as drugs, alcohol, and counterfeit items.
  • Joint public-private partnership arrangements, training sessions etc.: In 2011 in Hong Kong, the Customs and Excise Department established a Joint Liaison Group with the representatives of shippers, freight forwarders and truck drivers for exchanging operational views and comments on the Road Cargo System “ROCARS”. Moreover, Customs also launched an extensive publicity program and established outreach teams to assist the industry stakeholders to get used to the ROCARS. Following other government departments are listed on the ROCARS web-site http://www.rocars.gov.hk/ : Commerce and Economic Development Bureau, Census and Statistics Department, and Transport Department.

Finally, the center circle of the CBRA-BAC15 diagram highlights the basic, classical principles of trade facilitation – naturally in the context of multiple agencies dealing with cross-border regulations, procedures, IT-systems and data requirements:

  • Simplification & Harmonization: agencies work together with the first aim to streamline certification requirements and procedures, to minimize the number of data elements required from traders etc.; and the second aim to unify the rules and requirements facing supply chain companies.
  • Interoperability & Synchronization: agencies invest in improving interoperability between their inspection technologies, IT-systems etc.; they also work together to better synchronize their supervision and control processes, particularly for the benefit of supply chain companies.
  • Transparency & Predictability: agencies keep each other well informed of their current regulations, procedures, operations etc., as well as planned future changes – such proactive approach helps to minimize surprises and related hassles.

This concludes the second of three parts of our Border Agency Cooperation (BAC) blog. In Part 3 – to be published sometime in February – we focus on the overarching institutional arrangements on Border Agency Cooperation, including establishment of single border agencies (e.g. in the US and Australia); creation of one-stop border posts, OSBPs (multiple examples across the world); carrying work permanently on behalf of other agencies etc. We also plan to discuss bit more on the benefits and costs of BAC, as well as the main challenges and obstacles in BAC-projects across the globe. Talk to you again in February, Juha Hintsa.

 

Bibliography / sources for the examples and cases attached to the 15 BAC key actions:

  • Harmonized ´trusted trader´ & other certification programs: Commission Implementing Regulation (EU) No 889/2014 of 14 August 2014 amending Regulation (EEC) No 2454/93, as regards recognition of the common security requirements under the regulated agent and known consignor programme and the Authorised Economic Operator programme.
  • Coordinated company visits & audits: Email exchange with a Dutch Customs expert
  • Harmonized data filing arrangements: Interview with a Dutch supply chain and trade facilitation expert (29 January 2016); and AnNa Master Plan Extended Collaboration Project Book, December 2015. Available for download at: http://www.annamsw.eu/
  • Synchronized border interventions & inspections: Jain, S.R. (2012), “Coordinated Border Management: The Experience of Asia and the Pacific Region”, World Customs Journal, Vol. 6 No.1. (CBM25).
  • Harmonized operating hours: Article 8 (Border Agency Cooperation) of the WTO Agreement on Trade Facilitation of 15 July 2014; and Jain, S.R. (2012), “Coordinated Border Management: The Experience of Asia and the Pacific Region”, World Customs Journal, Vol. 6 No.1.
  • Sharing of agency intelligence, information & data: “Customs Cooperation Case Study for Canada”, paper submitted by Canada (Canada Border Services Agency – CBSA) for the July 2012 WTO Symposium on Trade Facilitation.
  • Joint investments in common resource pools (equipment, facilities etc.): “Coordinated Border Management”, WCO News, February 2015, No. 76.
  • Joint teams: “Customs find cocaine buried in cocoa bean shipment”, NL Times 25.5.2015, Available online at: http://www.nltimes.nl/2015/05/25/customs-finds-cocaine-buried-in-cocoa-bean-shipment/ (accessed 28 January 2016).
  • Joint operations: “WCO and INTERPOL joint operation against illicit trafficking in Africa leads to tobacco and alcohol seizures”, WCO Press Release, 27 August 2012. Available online at:   http://www.wcoomd.org/en/media/newsroom/2012/august/operation-meerkat.aspx (accessed 28 January 2016).
  • Collaborative criminal investigations & prosecutions: “Coordinated Border Management”, WCO News, February 2015, No. 76
  • ‘Single window’ –type import/ export/ transit data submissions: “Coordinated Border Management”, WCO News, February 2015, No. 76.
  • Common risk indicators, risk profiles & targeting systems: “Coordinated Border Management”, WCO News, February 2015, No. 76.
  • Mutual recognition of supply chain inspection procedures & outcomes: The Consistently Optimised REsilient ecosystem, CORE FP7 project, EU. See online at: http://www.coreproject.eu/ (accessed 28 January 2016).
  • Cross-training and empowering manpower: “Coordinated Border Management”, WCO News, February 2015, No. 76.
  • Joint public-private partnership arrangements, training sessions etc.: “Road Cargo System (ROCARS) (Hong Kong China)”. Available online at: http://www.wcoomd.org/en/topics/wco-implementing-the-wto-atf/atf/border-agency-cooperation.aspx (accessed 28 January 2016).

COMMISSION IMPLEMENTING REGULATION (EU) No 889/2014 of 14 August 2014 amending Regulation (EEC) No 2454/93, as regards recognition of the common security requirements under the regulated agent and known consignor programme and the Authorised Economic Operator programme, 2014 (CORE1069)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Summary: Existing customs Regulation ((EEC) No 2913/92 establishing the Community Customs Code) and aviation legislation (Regulation (EC) No 300/2008) provides for certain recognition of the certifications under the respective programmes, in particular with regard to the security examinations done for each of them. Regulation (EU) No 889/2014 is necessary for the recognition of the known consignor status with its relevance for the AEO as well, frame the scope of recognition of the common requirements between the respective programmes and allow for the necessary exchange of information between customs and aviation authorities. The 889/2014 is available for download at: http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:32014R0889&from=EN.

[s2If is_user_logged_in()]

Full review: Commission Regulation (EEC) No 2454/93 now provides that if the applicant for Authorised Economic Operator (AEO) status is already a regulated agent or a known consignor, the criterion on ‘appropriate security and safety standards’ shall be deemed to be met in relation to the premises for which the economic operator obtained the status of regulated agent or known consignor. Points 6.3.1.2 and 6.4.1.2 of the Annex to Commission Regulation (EU) No 185/2010 (4) provide that the appropriate authority, or independent validator acting on its behalf, should take into account whether or not the applicant for regulated agent or known consignor is a holder of an AEO certificate.

The practical implementation of both the customs legislation governing the AEO status and the aviation legislation governing the regulated agent and known consignor has shown that the existing recognition between the programmes is not sufficient to ensure the highest possible synergies between the respective security programmes. The security requirements for both the aviation security regulated agent and known consignor programme and for the customs AEO programme are equivalent to such an extent that both programmes may be aligned further.

Further alignment of both programmes in terms of equal level of recognition, including required exchange of information is necessary in order to decrease the administrative burden for the economic sector concerned and government authorities (both customs and civil aviation) while strengthening further the current level of security.

Regulation (EU) No 889/2014 is necessary for the recognition of the known consignor status with its relevance for the AEO as well, frame the scope of recognition of the common requirements between the respective programmes and allow for the necessary exchange of information between customs and aviation authorities.

The issuing customs authority shall immediately make available to the appropriate national authority responsible for civil aviation security the following minimum information related to the status of authorised economic operator which it has at its disposal:

  • the AEO certificate – security and safety (AEOS) and AEO certificate – customs simplifications/security and safety (AEOF) including the name of the holder of the certificate and, where applicable, their amendment or revocation or the suspension of the status of authorised economic operator and the reasons therefore;
  • information about whether the specific site concerned has been visited by customs authorities, the date of the last visit and the purpose for the visit (authorisation process, reassessment, monitoring); and
  • any reassessments of AEOS and AEOF certificates and the results thereof.

Relevance for CORE: The CORE implementation objectives, which specify what will be done and how to reach the vision, are all subject to the Policies, Regulations, and Standards that exist within the Security Domain of the Global Supply Chain. The following Work Packages are directly impacted by the implementing regulation (EU) No 889/2014:

  • Research and Analysis: Undertake requirements analysis and impact assessment. The project will undertake requirements analysis from different perspectives. In WP1 we will consolidate reviews of SCS regulations policies and standards from Reference Projects and specify implementation support requirements.
  • The Demonstrators: The CORE demonstrators will validate the applicability and benefits of the CORE approach in representative operating scenarios characteristic of the global supply chain. They will specifically show the way towards a Global Secure Supply Chain. The overriding goal is to demonstrate substantial gains in security and facilitation covering every major facet of the supply chain security sector.

The CORE demonstrators affected by the implementing regulation (EU) No 889/2014 are:

  • WP12: Demonstrator Schiphol – apply global data pipeline concept to air cargo supply chains, managing air freight specific trade compliance requirements, and offering supply chain visibility in dashboards. Trade lanes with e.g. Africa, involving multiple inspection authorities.
  • WP17: DHL Demonstrator – managing airfreight trade compliance requirements EU-US in the context of fast supplying of parts.

Also, WP19 is affected here: Stakeholder Engagement – Knowledge Diffusion and Sustainable Development. Specify and apply an inclusive Stakeholder Engagement Strategy emphasizing international co-operation to promote harmonization of regulations, and to support further development and implementation of international standards.

Cross-references and citations:

  • http://ec.europa.eu/transport/modes/air/security/
  • Regulation (EEC) No 2913/92. EU Regulation establishing the Community Customs Code.
  • Regulation (EC) No 300/2008. EU Regulation on common rules in the field of civil aviation security allows that entities complying with certain conditions and requirements may be certified to ensure and contribute to a secure supply chain.
  • Barosso, J. (2014), “COMMISSION IMPLEMENTING REGULATION (EU) No 889/2014 of 14 August 2014 amending Regulation (EEC) No 2454/93, as regards recognition of the common security requirements under the regulated agent and known consignor programme and the Authorised Economic Operator programme”, available at: http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:32014R0889&from=EN.

CORE1069
[/s2If]

Border Agency Cooperation, Part 1 of 3

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

“A beloved child has many names”, goes an old Finnish proverb. This saying applies quite well in the conblog-210116text of ´smart cooperation between multiple agencies when dealing with cross-border supply chains, goods movements and transports´. The World Customs Organization talks about Coordinated Border Management (CBM); the European Union about Integrated Border Management (IBM); the World Bank about Collaborative Border Management (CBM); and Organization for Security and Cooperation in Europe about Comprehensive Border Management (CBM). Cross-border Research Association is aligning with a fifth term: Border Agency Cooperation (BAC), a term used in the Trade Facilitation Agreement of the World Trade Organization. Despite minor differences in scope, priorities, underlying principles and philosophies among these five terms (and possibly even more), one can easily agree that the work carried out under any and all of them aims to coordinate activities across and within various border control agencies, for the benefit of both governmental agencies themselves as well as supply chain companies.

Our first blog on Border Agency Cooperation, BAC, provides an illustrative worst case example on how complex, slow and expensive a cross-border supply chain execution comes when no cooperation takes place between relevant government agencies, neither nationally nor internationally. The illustration is about meat export from Latin America (Country X) to the European Union (Country Y), with maritime transport in reefer containers.

A well-known beef producer in country X– also the first Authorized Economic Operator (AEO) beef producing company in the region – has just signed an annual contract with a beef importer and distributor in country Y. As this is the producer ‘s first export deal to the EU, the producer needs to ensure that all licenses and certificates are up to the EU standard. Organizing health certificates, certificates of origin, sanitary certificates, export licenses – and what have we – takes weeks and weeks of time. There is no communication or procedures in place between the various agencies and officials to facilitate the process, no coordinated company visits or audits, no sharing of information, and no mutual recognition of inspections.

When all documents are finally in place, and regular exports can start, the beef producer and it´s forwarding agent face the burden of filing export data to customs, to sanitary agencies, and to national security agencies – with somewhat similar datasets, but with no single-window filing opportunity. And when export controls and inspections take place – which happens often – there is no synchronization of inspection times between the different agencies. One agency might come to inspect the reefer container on Monday noon, second one on Wednesday morning, and third on Friday afternoon – another week lost in the beef supply chain lead-time.

Once the consignment is happily on board towards the EU, one continues to experience lost BAC opportunities: no data is passed from country X customs or sanitary agencies to their counterparties in country Y, to enable pre-arrival compliance control and risk assessment. In case of criminal suspicions – e.g. when supply chain insiders exploit beef shipments for cocaine smuggling – no intelligence is shared between police and customs, from country X to country Y. The option of joint law enforcement operations between country X and Y police and customs agencies has never been even considered. Even on national level, both in country X and Y, the agencies are not co-operating neither on risk profiling and targeting systems, nor during criminal investigations and prosecutions – what a waste of resources when it comes to catching and convicting the bad guys…

In the meanwhile, some ten days later, the ship arrives at a major sea port in country Y. For the importer, there is no option for single-window data filing; instead, import data must be transferred separately to all different agencies in country Y. As the customs administration in country Y has no Mutual Recognition Agreement (MRA) in place with country X customs – neither when it comes to AEO certificates nor when it comes to recognizing inspections carried out at export – it treats the import as a “medium to high risk” one, calling for physical inspections. And as the sanitary agency does not share any common resources with the customs administration – particularly no joint inspection facilities and equipment, including x-ray machines – and even the daily opening hours are different from the customs hours, the sanitary agency carries out their own inspections only two days after the customs intervention. And finally, improving the situation does not seem likely, as there are no joint public-private partnerships, and no export/import compliance training sessions or similar in place, neither in country Y nor in country X.

This concludes the first of three parts of our Border Agency Cooperation (BAC) blog. In Part 2 – to be published next week – we will present CBRA´s conceptual model (Hintsa J., Dec.2015) on BAC key actions and beneficiaries: which key actions to take in order to speed up the logistics chain, to save costs with all actors, to increase overall predictability, and to improve government agency performance e.g. in terms of number of seizures and convictions. In the BAC Blog Part 2, we plan to present some preliminary experiences and real-life results from FP7-project CORE. Please stay tuned!

Zambia and Zimbabwe’s single-stop solution to boosting intra-African trade, The Guardian 2012 (CORE2008)

/0 Comments/in , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , /by

Summary

The Guardian news article summarizes benefits and challenges of the African first one-stop border post, located at the Chirundu border crossing across the Zambezi river between Zambia and Zimbabwe. At the border post, officials in both countries inspect only inbound traffic, for example Zambian authorities control only incoming traffic from Zimbabwe. Thanks to this one-stop arrangement, trucks and barges are obliged to stop only once and undergo only one set of border formalities. The one-stop system has accelerated border crossing times tremendously, from a two or three day wait down to a thirty-minute rest. Moreover, the faster border formalities have translated into higher traffic at the border post (from earlier 2000 to today’s 14000 trucks per month) and associated larger tax and duty revenues. But most importantly, the faster and simpler border formalities have facilitated trade of many small-scale merchants, who commonly trade small amounts of food, clothes, and other everyday commodities. Today, these small merchants face less delays, cumbersome formalities, and arbitrary duties and facilitation payments that dishonest customs officials may impose on their goods. This progress has brought many of the informal merchants, who used to smuggle their merchandise before, back into the sphere of the formal economy. Even so, the smuggling is still a major problem in Africa: the article suggests that there are smuggling routes so established that 30 tonne trucks use them to evade customs controls, and that this informal smuggling economy accounts for a staggering one-third of the African gross domestic product (GDP). The article implies that the share of the informal economy could be further reduced through consolidation of African trade blocks (there are several), harmonization and simplification of border formalities, and enhanced border agency cooperation. The news report is available at: http://www.theguardian.com/global-development/2012/may/29/zambia-zimbabwe-intra-african-trade

Review by Toni Männistö (CBRA)

[s2If is_user_logged_in()]

Full review

This Guardian article showcases a great example of successful border agency cooperation in Africa. The CORE WP12, the “demonstrator Schipol” focusing on shipping of fresh cut flowers from Kenya to the Netherlands, might choose to study this African one-stop border concept in more detail. Closer analysis may reveal key success factors and obstacles that characterize the border agency cooperation in Africa. Also CORE’s WP19, that produces material for training and education, may use this African one-stop border as an illustrative example of border agency cooperation in developing countries. The CORE’s risk and IT clusters might need to explore this case in more detail to understand technical aspects of this one-stop border post concept.

Reference

The Guardian, Zambia and Zimbabwe’s single-stop solution to boosting intra-African trade, the Guardian, 29. May, 2012. Retrieved from http://www.theguardian.com/global-development/2012/may/29/zambia-zimbabwe-intra-african-trade

CORE2008

[/s2If]